Question about Yamaha HTR-6090 Receiver

1 Answer

HDMI cable 30 ft to projector

I am trying to hook up a projector 20-30 ft away using HDMI and I am not getting a signal, but I do get an HDMI signal within 6 ft of receiver. Are there limitations to the distance this receiver can push a signal?
I purchased a Tripp-Lite HDMI signal booster and that gives me a picture that goes in and out. I just upgraded to the most recent firmware for the receiver. When I connect the same cables straight from my Dish DVR I get a clear picture (as well as sound although I am not concerned with sound to the projector). Let me know if there is a different tech support division I should contact.
Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 151 Answers

The problem you are haveing may be the cable you are useing,if you can get a loan of a QEDor CHORD CO. cable try these,the chord co. cable comes with a line driver built into it and may solve your problem.Most cables for hdmi dont like 6 meters or over but i have had no problems with the chord co. or qed cables.
hope this helps.
CABLE GUY.

Posted on Jul 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get ps4 to pass signal thru avr to projector.


Possible PS4 HDMI Handshake Output Problem - AVS Forum ' Home ...

www.avsforum.com/.../1508885-possible-ps4-hdmi-handshake-output-p...

Dec 31, 2013 - 20 posts - ‎15 authors
Nothing seems to make the PS4 pass a signal through the AVR. .... can output videothrough the Integra, why can't Sony get the HDMI working? PS4 - 3D Playback Not Working :-(
30 posts
Aug 12, 2014
Run HDMI Directly to TV or A/V Receiver?
30 posts
Dec 19, 2013
AV receiver problem with Xbox One
30 posts
Nov 23, 2013
Solution to HDMI @ 1080p receiver/display HDCP ...
30 posts
Dec 14, 2008
More results from www.avsforum.com

My Denon AVR-X4000 won't output video signal from attached HDMI ...

forum.blu-ray.com > Audio > Receivers

Dec 21, 2015 | Denon AVR-3311CI 7.2 Channel Networking...

1 Answer

Denon AVR-4806 HDMI problem


Check which port you have the HDMI cable connected to, then go into the menu on the TV, look for it on screen and Enable it .

Good luck

Nov 16, 2013 | Denon AVR-4800 Receiver

1 Answer

Denon AVR 1610 hdmi to component video conversion missing?


hello i believe your problem is that you are trying to downconvert from hdmi to component connections and Denon receivers will not do that.

I have a 4310 and I know it will UPconvert from an analog signal to HDMI but won't do it the other way around.

you may have to use component inputs for all your equipment. You will also have to go into the receivers menu and designate which signal is being used for each component as it won't auto select between analog and digital signals when it comes to video.

hope that helps

Dec 30, 2009 | Denon AVR-1603 Receiver

1 Answer

No video from RX-V863


This reciever might not upconvert component or composite to hdmi, which means if you have anything but hdmi hooked up you will not see it. Check your manual for what all the reciver will ouput.

Jul 24, 2009 | Yamaha RX-V863 Receiver

2 Answers

Lose audio unless projector is on or unplugging hdmi cable from sharp xr-32x projector. works fine when watching projector


Your receiver is sensing the video source. Try using optical, or coaxial digital audio for an input, this may work.

May 11, 2009 | Yamaha HTR-6160 Receiver

1 Answer

How to hookup yamaha rx-v730 receiver to projector & cable unit.


hook up hdmi cable from cable box to receiver hdmi input 1 then from hdmi out to your projector or tv,i don't know what kind of inputs you have on your projector .whatever you have run from projector to receiver input example component red,blue,green then run from both say to the av input 1 then set your receiver to av1 and you should get picture.

Jan 25, 2009 | Yamaha RX-V730 Receiver

1 Answer

Sound goes in and out


First thing you need to try is outputting from the projector with a different audio source. either composite or digital coaxial, etc depending on what the projector has. First thing is to make sure its not the HDMI on the projector.
Keep me updated,
Lee

Jun 16, 2008 | Onkyo TX-SR605 Receiver

2 Answers

Video Monitor Out issues


Just to be clear, what is the input you are using on the projector?
Thanks,
Dan

Apr 18, 2008 | Denon AVR-3805 Receiver

Not finding what you are looking for?
Yamaha HTR-6090 Receiver Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...