Question about Magimix 5100 Cuisine Systeme Food Processor

2 Answers

Magimix sytem cuisine

How do I replace the old spindle when it is worn

Posted by on

  • Anonymous Aug 18, 2008

    Main white spindle worn blades will not go round

  • Anonymous Mar 15, 2014

    i just need to replace spindle cover on a magimix 5200

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

How to Change a Magimix Food processor plastic spindle.

This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.


The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.


Cover the main body with a cloth so as not to damage the look of the food processing machine.

Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle

Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.


This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.

When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.



All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Posted on Aug 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The solution posted by BBS would not work for me. However, when I warmed the plastic cover with a hair-dryer, the plastic spindle (shaft) cover came off very easily.

Posted on Mar 28, 2012

  • Nicole Shune
    Nicole Shune Nov 11, 2013

    Thanks for miweaver's solution, it works!Hair-dryer is very useful for this case.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I test the motor relay on a Magimix food processor?


Overloading may have caused a thermal protector buried in the motor windings to open in which case the motor will have to be replaced.

Jun 04, 2016 | Magimix 4100 Cuisine Systeme 1268 Cups...

1 Answer

Where Can I buy a bowl and lid for my Magimix Cuisine Systeme 300 and are are there any shops in Western Cape that sells spare parts?


Since I don't know what country you are asking this question from ( I am in Canada), I recommend you do a Google search for "magimix cuisine systeme 300 parts" . I came up with this site of many http://www.magimix-spares.co.uk/Cuisine-systeme-3000-spare-parts-accesesories-stocked/products/1095/
You can even search eBay

Oct 25, 2015 | Magimix Food Processors

1 Answer

Can I change the plastic motor spindle on a magimix 5100?


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Aug 29, 2014 | Magimix 5100 Cuisine Systeme Food...

1 Answer

Magimix 5100


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Aug 29, 2014 | Magimix 5100 Cuisine Systeme Food...

1 Answer

The extension post in my magimix 4200 is stuck on the motor shaft seems like It's welded on can anyone help


How to Change a Magimix Food processor plastic spindle.
This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.

The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.
Cover the main body with a cloth so as not to damage the look of the food processing machine.
Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle
Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.
This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.
When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.
All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Magimix Spares Parts from BBS Ltd

Apr 03, 2014 | Food Processors

1 Answer

Need a manual for cuisine 4200


Magimix makes the Instructions for Use for the Cuisine 5200 available on their website:

http://www.magimix.com/upload/notice_d_utilisation/ma_cuisine/download_usa.pdf


If you don't mind paying a small fee there is also an Instruction Book available here that may also be applicable to the 4200:

http://www.magimix-spares.co.uk/Magimix-le-micro-instruction-book-and-le-micro-recipe-book/product/54138/54138/

Nov 01, 2011 | Magimix 5100 Cuisine Systeme Food...

1 Answer

Need bowl and lid for 5100


Go to this site. or type magicmix in the search bar at the top of the screen, Good Luck


http://www.magimix-spares.co.uk/Parts-for-Magimix-5100-lid,-...

Oct 30, 2009 | Magimix 5100 Cuisine Systeme Food...

1 Answer

Magimix blade is stuck


You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Jun 28, 2009 | Magimix 5100 Cuisine Systeme Food...

1 Answer

Dough hook stuck


New shaft cover req about £10.00 you will proberly have to replace any damaged blades aswell.

Sep 05, 2008 | Magimix 5100 Cuisine Systeme Food...

Not finding what you are looking for?
Magimix 5100 Cuisine Systeme Food Processor Logo

1,307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

Ross Keen

Level 3 Expert

1189 Answers

richie46

Level 3 Expert

7389 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...