Question about Coffee Makers & Espresso Machines

1 Answer

Lost instrucions... I have a toddy coffe maker and I can't find the instruction booklet... want to brew some coffe, but don't know how much water to use for a pound of coffee, (or when to add it).

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an old coffee perculator maybe 60's 70's where you put the coffee in a container inside the pot and the water bubbles up through and up and hits the glass at the top. It is white with flower on it. It has the numbers auto 1 2 3 and then to the right non auto. I do not have any intstructions for this so not sure how it works now or if it switches off after a certain time. \agaian not sure how long to let the water boil through the coffee. Any advice would be very welcome.

Many thanks
Linda

Posted on Jul 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My bunn 10 coffe maker just died


not brew if no water coming in to filll the tank

Jul 11, 2014 | Bunn GRX-B

1 Answer

Won"t brew the coffe right and hot water coming


Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

';
[[]\';

Jul 22, 2011 | Keurig Platinum B70 Coffee Maker

1 Answer

The brew unit is not tamping the ground coffe properly.


Give the brew unit a good wash,then lube all the moving parts with food grade grease.
If you are able dismantle the brew unit and wash in warm soapy water,this removes coffee and any old lubricant.

Feb 21, 2010 | Gaggia Titanium Espresso Machine

1 Answer

Have a Gaggia Cyncrony Compact Coffe Machine that doesn't brew!


Has the machine been de-scaled recently? I would run a descaling solution through the machine first to eliminate that.

Jan 15, 2010 | Gaggia Syncrony Compact Coffee...

1 Answer

No coffe in the cup


Hi
I would say you have a stripped thumb screw. It is in the top left side of the brew unit and holds the filter screen in. If it is stripped there will be water or coffee in the pocket on top left of the brew unit.

Dec 26, 2009 | Gaggia Syncrony Compact Coffee...

1 Answer

I have water leaking from under and I cannot see where it is from. I have taken the brew group out and cleaned but it still appears.


try this:move brew unit and you will see white brew valve,clean inside sometimes coffe stuck inside and dont draining water from valve in tray

Aug 20, 2009 | Saeco Vienna SuperAutomatica Coffee...

1 Answer

It wont brew drip coffee


What are the simptoms? Once you pour the water and add the coffee it should start when you press the coffee button.

Jun 02, 2009 | Krups XP2070 10 cup Coffee Maker/15 bar...

1 Answer

Out of 10 cups of coffe maybe i get 4 cups


Hi,

Try to make a cup of water (the) and see if you can make a full cup.
Try to take out the brewing unit (central unit) and wash it in warm water.

/Best regards
/Mirran

Jan 29, 2009 | Saeco Incanto Classic Espresso Machine

1 Answer

General question about the Mr. Coffee Espresso ECM10


Greetings!

Put desired amount of water in resevoir (plus a little extra to be used to steam your milk for latte) and close up tightly.

Put espresso grind coffee in basket and tamp down with a tamper. If grounds are not packed, steam will seep through and will cause an erosion of sorts instead of just letting the steam hit the grounds.

Put the basket with handle group in recess rotating to the right as far as it will go.

Rotate the ON/OFF switch to the symbol for "Brew" until you get out the desired amount of espresso.

Then, take a caraf of milk and immerse it with the plastic black steam arm. Rotate switch to "STEAM" and froth milk. In the beginning, ensure that you have enough water for the espresso AND enough left to froth without having to shut off machine, refill with water, just to froth.

Be careful when you open the water resevoir cap after brewing because there is a vaccuum created and a burst of steam will shoot out the lid and may burn you.

The gasket above the grounds hopper eventually will deteriorate and more steam will escape than espresso is produced. There is no replacement parts for this machine since it was made in China according to a Mr. Coffee representative that I called this morning at 1-800-MR-COFFEE (800) 672-6333.

Good luck with your machine. Hope this helps! If you don't have a tamper for the grounds, I found one at Bed Bath and Beyond. It is stainless steel with 2 sizes. The smaller size works for this model.

Jan 17, 2009 | Coffee Makers & Espresso Machines

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Kolbrun...

Level 3 Expert

1194 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...