Question about APC USB Port Version For Windows 98 (APCBP350UC) UPS System

1 Answer

Usb 2.0 windows 98

How to download installer of usb 2.0 for windows 98

Posted by on

  • Jerry May 11, 2010

    Are you trying to install usb2.0 drivers for the pc's motherboard or for an external usb pci card?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 134 Answers

Windows 98 SE supports USB 2.0. The original Windows 98 (gold) or Windows 98 OEM or Windows 98 Upgrade versions which are not SE will not support USB 2.0. Nor is there any way to get USB 2.0 support for these Windows 98 versions unless you upgrade to Windows 98 SE.

Note that the Windows 98 SE upgrade CD will fail upon completion, leaving the SE Upgrade with a corrupt registry, if you try to run the Windows 98 SE Upgrade CD on a Windows 98 system that has a version of IE installed which is higher than IE 4.

Posted on Apr 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a problem to install window 98 .


Another solution is to download and install Microsoft Virtual PC in XP, create a Virtual PC drive, and install Windows 98 onto the Virtual PC drive. This works fine if you want to run Win 9X programs which don't require access to USB ports on your computer. If you need Windows 98 to have full access to all of the computer hardware, then use palaboy's solution.

Apr 21, 2009 | APC USB Port Version For Windows 98...

2 Answers

Garmin gps


What operating system are you using? Windows Vista?

Jun 11, 2008 | UPS Battery Backup Systems

1 Answer

Cannot retrieve pictures from Windows 98


Try these generic Windows 98 USB Mass Storage Device Drivers:
http://www.technical-assistance.co.uk/kb/usbmsd98.php

Apr 01, 2009 | Digi UPS Battery Backup Systems

1 Answer

Windows 98FE will not see my USB corsair stick nor ext Maxtor USB


What you need is a USB mass storage driver, check out the following link for a download:

http://www.technical-assistance.co.uk/kb/usbmsd98.php

Mar 12, 2009 | UPS Battery Backup Systems

1 Answer

Connection problem with msr206


1. Try plug in the device to the back of your computer instead of the front USB port (this is because some computers don't have enough power in the front USB ports) 2. Some USB 2.0 device are not backward compatible with USB 1.1 ports. Try plugging in with USB 1.1 and 2.0 port to see that's the cause of the problem.
3. Try downgrade all your USB port from 2.0 down to 1.1, you can do that in your BIOS.
4. if all failed, try the USB device on a different computer. Then you can determine if the USB device or the USB port is the culprit of the problem
also, if you can't find your solution here, you might be able to find it on the link below...
http://dan.hersam.com/archives/2005/07/18/usb-device-not-recognized
please give a fixya rating for my help to you , thanks and if you need further assistance , i'll be glad to continue to help if needed

electech

Nov 07, 2008 | UPS Battery Backup Systems

2 Answers

Laptop doesn't recognize QuickCam® Deluxe for Notebooks (2)


hii john sorry about this .. ok
another solution install the driver clicke here

restarts the computre When will the solution accept my respect and greetings

sincere markknof

Aug 24, 2008 | UPS Battery Backup Systems

1 Answer

Transcent JFV30 Pendrive Driver


Hi,

There are no drivers required to detect and access a flashdrive or even a Transcend PenDrive JFV30 under Windows XP or Vista. They are however needed for other Operating System such as Windows 98. Should this be the case, the drivers may be found here. If under XP or Vista, the pendrive could not be accessed/detected, then it is not the pendrive's drivers (or lack thereof) that should be the concern, it is the USB interface/drivers of the PC. Vista has been known to have major issues with USB and has issued a patch/upgrade/update here. XP SP1 has its own issues and the Microsoft patch/upgrade/update is here.

Hope this be of help/idea. Pls post back how things turned up or should you need additional information.

good luck and kind regards.

Feb 04, 2008 | UPS Battery Backup Systems

1 Answer

Installation on windows vista program


Who makes the ez305 web cam. Look @ the website of the producer if they have a driver your in. But if they don't and vista won't install a generic driver it won't work. Vista will make a lot of hardware obsolete just like xp for hardware that works with windows 98.


Johnlgrn

Dec 30, 2007 | UPS Battery Backup Systems

1 Answer

Mustek Scanner


check system to see if there is lpt port(control panel - system)
check drivers of scanner that are compartible with vista
if nothing please tell me your scanner model and the cable type

Nov 24, 2007 | UPS Battery Backup Systems

1 Answer

Installation for canon pixma ip 1500


Hey you again, you rated me yesterday Inappropriate. Actually, fixya expert afraid to give some solution because you will rated us Inappropriate even the problem is came from you where you was not clearly stated your problem.

Ok, but anyway I am still to help you, Is it the problem goes to the manual installation you need or the driver instead?

Printers used to be the bugbear of computer users. They were difficult to set up and ornery in operation. That's no longer the case and it's likely you'll have no problems getting your printer up and running. This is particularly the case if your printer comes packaged with your computer system or if you stick to well-known brands such as Hewlett-Packard, Epson, Lexmark and Canon.
Connecting a printer involves four steps:
  1. Unpacking your printer, removing any packaging material and installing the ink or toner cartridge. Refer to your printer's instructions to guide you.
  2. Connecting the printer cable to the printer and to the back of your computer.
  3. Connecting the printer's power cord to a power outlet.
  4. Installing the printer driver and any additional software. The printer driver is a piece of software that tells your computer how to interact with your printer.
If your printer comes as part of your system, you may find that its driver is already installed. In that case, all you'll need to do is unpack it, connect the printer cable and power cord and switch on your computer.
geekgirl.tip: Get a cable One word of warning: Make sure you purchase a printer cable! Often, this is not included in your computer system, despite it being an essential item. You'll need the correct type of cable for your printer: If it's a USB-enabled printer, you need a USB cable (note, the new USB 2 cables work with older USB 1 printers, too; so if in doubt, get a USB 2 cable); if it's a parallel printer, you'll need a parallel cable.
Make sure you get a cable long enough to reach easily from your printer to your computer. However, you should avoid cables longer than 10', because long cables can cause problems with communication between printer and computer. Try to position your printer so a 6' (or shorter) cable can make the connection.
Follow the wizard If your printer's software has not been pre-installed, read any installation instructions that accompany your printer and follow those instructions. If no instructions are provided, follow this procedure:
(Note: This procedure applies to printers which use a parallel connection. If your printer uses a USB connection, you should connect it while Windows is running and it will be recognised.)
  1. Make sure you have your original Windows CD-ROM handy. You may need it.
  2. Switch the computer off.
  3. Connect the parallel printer cable to your computer.
  4. Connect the printer's power cord to a power outlet.
  5. Switch on the printer and the computer.
  6. In most cases, Windows will detect that you've attached a new hardware device and it will launch the Add Hardware Wizard and attempt to search for the appropriate software. If the wizard doesn't launch and Windows appears to ignore your printer, you can launch the Add Printer wizard yourself by clicking the Start button, selecting Control Panel, clicking Printers And Other Hardware, and then clicking Add Printer.
  7. If the printer is directly connected to your computer, select the Local Printer Attached To This Computer option. If you will be connecting to the printer via a network connection, select the Network Printer option, then click Next.
  8. The wizard will first try to search for any Plug and Play devices (these are components that should, by rights, automatically notify Windows when they're first connected). If the wizard discovers your printer, it will display further instructions to complete the installation. You may need to restart your system to finish.

Nov 23, 2007 | UPS Battery Backup Systems

Not finding what you are looking for?
UPS Battery Backup Systems Logo

Related Topics:

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top APC UPS Battery Backup Systems Experts

Cindy Wells

Level 3 Expert

4756 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an APC UPS Battery Backup System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...