Question about HP Officejet 7130 All-In-One InkJet Printer

2 Answers

7130 will not print

I know there is a memory reset for the 7130 using the number pad on the All in One face. What are they? My printer will not print. I cannot find the icon for the printer. I have reinstalled the driver several times. I have a PowerMac G-5 iMac.
I did get it to start, but it spit out 12 pages, some of which read printer font styles. Thank you Teresa

Posted by on

2 Answers

Unplug ac plug press the on button & No 3 at the same time then wait for 10 sec plug ac plug back in thing should work now
good luck

Posted on Aug 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try # and 6 and shutdown. Whe you restart it should be reset.

Posted on Jul 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picturemate printer; how do you reset ink pad counter; or how do you get rid of the error message so you can continue printing


Hi

You need a reset ink pad software to get rid of this error message. Since you do not put the printer model and number. Try this link for epson printer only. http://www.ssclg.com/epsone.shtml. If not, use websearch to find your free software resetter for ink pad error message.

Let me know if you need more help

Mar 12, 2011 | Printers & Copiers

1 Answer

Had printer cartridge refilled but when i put it back in the messege says incompatible ink cartridge-black


I would never use refilled ink. This is a lesson. You can still print, yet the cartridge needs a new "chip" they should have given you when they refilled it. You can try: remove the cart. turn off printer, unplug it, then put old cart back in. Do this three or four times and the memory of the printer can only remember three or four resets and then put refilled cart in. Hope this works for you. I was told this for an HP 7130 (similar, yet older version).
Brock

Sep 16, 2010 | HP 8500 Premier All-In-One InkJet Printer

1 Answer

Ink absorber full


There are two possible reasons for an error ink absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to clear the error and let the printer print again.

Clean the two absorber pads
. Its is actually two absorber pads located on the right side of the printer, under the ink cartridges when it is in home base position.
How to access the pads and remove it for cleaning?
Turn on the printer. Lift the top cover to expose the ink cartridges. As soon as you lift up the cover the cartridge carrier will move away from its home base.. Then the pads will be exposed. It will be a dirty job so be prepared with your tweezer and extra cloth for some ink spill. Using the tweezer, lift up the pads sitting on a rubber retainer. The pads can be easily clean by placing it under a running water. Warm water will be nice to remove the ink from the pads. After this, you can now return the pads. However, the problem will not be solve especially if you are currently facing the waste ink absorber full error.

Reset the Printer using an MP Tool
Mp Tools are utilities designed to clear errors that will appear in an MP160 printer. Download this MP Tools here.
while the printer is on Run this software
1. Click Reset Main (main) to reset the waste ink counter and
2.
Click Reset Platen button (E27).

If errors still persist.
Press and Hold down Reset button and wait until the printer restart.
Release the Reset button and wait until it fully initialize.

Happy printing.
Please comeback and rate this answer.
Thank you for using Fixya.

Aug 18, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Ink absorber if full, contact service provider? is there any other remedy?


There are two remedies for an error ink absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to clear the error and let the printer print again.

Clean the two absorber pads
. Its is actually two absorber pads located on the right side of the printer, under the ink cartridges when it is in home base position.
How to access the pads and remove it for cleaning?
Turn on the printer. Lift the top cover to expose the ink cartridges. As soon as you lift up the cover the cartridge carrier will move away from its home base.. Then the pads will be exposed. It will be a dirty job so be prepared with your tweezer and extra cloth for some ink spill. Using the tweezer, lift up the pads sitting on a rubber retainer. The pads can be easily clean by placing it under a running water. Warm water will be nice to remove the ink from the pads. After this, you can now return the pads. However, the problem will not be solve especially if you are currently facing the waste ink absorber full error.

Reset the Printer using an iP Tool
iP Tools are utilities designed to clear errors that will appear in an iP1800 printer. Download this iP Tool here.
while the printer is on Run this software
1. Click Reset Main to reset the waste ink counter and
2.
Click Reset Platen button

If errors still persist.
Press and Hold down Reset button and wait until the printer restart.
Release the Reset button and wait until it fully initialize.

Happy printing.
Please comeback and rate this answer.
Thank you for using Fixya.

Aug 18, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Ink absorber is full cannot print


There are two possible reasons for an error ink absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to clear the error and let the printer print again.

Clean the two absorber pads
. Its is actually two absorber pads located on the right side of the printer, under the ink cartridges when it is in home base position.
How to access the pads and remove it for cleaning?
Turn on the printer. Lift the top cover to expose the ink cartridges. As soon as you lift up the cover the cartridge carrier will move away from its home base.. Then the pads will be exposed. It will be a dirty job so be prepared with your tweezer and extra cloth for some ink spill. Using the tweezer, lift up the pads sitting on a rubber retainer. The pads can be easily clean by placing it under a running water. Warm water will be nice to remove the ink from the pads. After this, you can now return the pads. However, the problem will not be solve especially if you are currently facing the waste ink absorber full error.

Reset the Printer using an MP Tool
Mp Tools are utilities designed to clear errors that will appear in an MP150 printer. Download this MP Tools here.
while the printer is on Run this software
1. Click Reset Main (main) to reset the waste ink counter and
2.
Click Reset Platen button (E27).

If errors still persist.
Press and Hold down Reset button and wait until the printer restart.
Release the Reset button and wait until it fully initialize.

Happy printing.
Please comeback and rate this answer.
Thank you for using Fixya.

Aug 17, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Ink absorber (sponge part)


There are two possible reasons for an error ink absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to clear the error and let the printer print again.

Clean the two absorber pads
. Its is actually two absorber pads located on the right side of the printer, under the ink cartridges when it is in home base position.
How to access the pads and remove it for cleaning?
Turn on the printer. Lift the top cover to expose the ink cartridges. As soon as you lift up the cover the cartridge carrier will move away from its home base.. Then the pads will be exposed. It will be a dirty job so be prepared with your tweezer and extra cloth for some ink spill. Using the tweezer, lift up the pads sitting on a rubber retainer. The pads can be easily clean by placing it under a running water. Warm water will be nice to remove the ink from the pads. After this, you can now return the pads. However, the problem will not be solve especially if you are currently facing the waste ink absorber full error.

Reset the Printer using an MP Tool
Mp Tools are utilities designed to clear errors that will appear in an MP150 printer. Download this MP Tools here.
while the printer is on Run this software
1. Click Reset Main (main) to reset the waste ink counter and
2.
Click Reset Platen button (E27).

If errors still persist.
Press and Hold down Reset button and wait until the printer restart.
Release the Reset button and wait until it fully initialize.

Happy printing.
Please comeback and rate this answer.
Thank you for using Fixya.

Aug 17, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Problem for HP Officejet 7130 All-In-One InkJet Printer tells me to close ink cartidge and its CLOSED! Thanks


The full-featured HP OfficeJet 7130 all-in-one offers photo printing, double-sided printing, an automatic document feeder (ADF), a fax, a scanner, a copier, and inputs for all of the current breeds of photo memory cards on the market today. At first blush, the machine's large footprint may seem overbearing--until you take into account just how much space you're saving by putting all of your technological eggs into one basket. Unfortunately, the 7130 isn'

Jul 16, 2010 | HP Officejet 7130 All-In-One InkJet...

1 Answer

What is "enter color patch number" on the hp 7130


The printer is waiting for you to analyze the color calibration page that was just printed. The color patch number will be indicated after you follow the directions on that page. Put in that number and hit Enter.

Otherwise hit Cancel to exit the calibration menu.

I hope this helps.

Cindy Wells

Jun 18, 2010 | HP Officejet 7130 All-In-One InkJet...

1 Answer

Problem - e 27 found


this is an error code for Canon e.g.

E27 Waste ink absorber full or platen waste ink absorber full
How to clean first:
Two absorber pads are located on the right side of the printer, under the ink cartridges. With the printer on, lift the top to expose the cartridges. They will automatically move out of the way. You can move them to the left side by hand if the printer is not on. They each sit in a rubber socket. The pads can be removed and cleaned.
Take the pads out of the socket with tweezers. Clean them with warm water. It is best to use a spray bottle (on stream) and blast it through the pad until it is white. Sometimes just putting it under a running tap will be sufficient. If there is ink in the socket after taking the pad out, it can be cleaned up with a paper towel. Put the pads back into the socket and you have successfully cleaned the ink absorbers. Now you may have to reset the error message E27, so you can print again.

How to clear E27 code : Waste ink absorber full

1.With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
2.When the Power is lit, press the Stop/Reset button two times
while pressing and holding the Power button.
3.When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
4.When the on/off lights in green, press the Stop/Reset button the
specified number of time(s) according to the function listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately in orange
and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)
5.Turn off the printer.( it must be turn off) then turn it on again.

All the best... let me know if you require any further help.

Please do rate and thank for coming on FixYa

Mar 04, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon laser class 730i memory full


Reset the memory
Under the one touch key pad
hit the: Reg Data
hit # key
scroll on key pad until you come to all mem clear #12 and hit enter

Feb 01, 2008 | Canon 730i Laser Printer

Not finding what you are looking for?
HP Officejet 7130 All-In-One InkJet Printer Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...