Question about JVC RX-9010V Receiver

2 Answers

JVC RX-9010V - Setting up Digital Inputs

OK, after 25 years of working in the pro-audio industry, I've finally met a piece of gear I couldn't figure out on my own. Maybe one of you guys can help.

My buddy bought the above mentioned receiver used, and asked me to help him with setup. I said sure, but it will cost you breakfast. (but I digress.... or digest).

The manual implies that the digital inputs (optical and coax) can be assigned to the source buttons on the front panel. Having read the page in the manual over and over, I just don't get it.

My buddy's source devices are as follows:

1: DirecTV HD DVR with optical out
2: HD DVD player with coax out.
3: Combo DVD/VHS Recorder-Player with optical out.


I assumed (erroniously, it appers) that the digital inputs on the back of the receiver could be freely assigned to the source select front panel buttons.

Can one of you guys help me understand this receiver better?

Reid

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Just to the left of the volume is a "settings" button. Press it and cycle through the options until you reach "Digital Coax," then use the "Control" up and down buttons to change the assigned source.

Posted on Jul 04, 2008

Buy your friend a new receiver!

Posted on Jul 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a JVC RX-9010V I am not getting any sound but i am using smaller speakers rated at 8 omns but the one is rated 150 watt..no sound no hiss..The amp does click as it where turning on, have seen n


Have you tried re-initiating it ? Strange the unit initiates but no sound.
Sorry, I forgot exactly how, but you can Google " factory reset
JVC RX-9010V". hope that helps.

Oct 27, 2014 | JVC RX-9010V Receiver

2 Answers

What Years was the JVC Rx-208bk Made?


This link suggests year 2000 (twice):

RC: JVC RX-208BK Receiver (RTI Family)


http://files.remotecentral.com/view/6345-16801-1/jvc_rx-208bk_receiver.html

Jul 16, 2014 | JVC Rx-208 Rx-208bk Am/fm Digital...

1 Answer

How do I get the digital audio cable to work from my tv to my JVC rx-6018v reciever


To start, make sure your receiver supports "digital" in the form of coax (rca) or optical type to their respected video inputs.

Mar 31, 2014 | Audio & Video Receivers

1 Answer

Have a JVC RX-9010V receiver and get no sound on FM , tv, etc.


no my antenna is a good one i tried with mp player too?? Is this a way to reset it to factory?

Nov 14, 2013 | JVC RX-9010V Receiver

1 Answer

NO AUDIO ON FM BUT HAS AUDIO ON CD?,ANY IDEAS?


Restore factory settings. Google "(model no) factory reset". Luck.

Sep 18, 2013 | JVC RX-9010V Receiver

2 Answers

Hi yes i have the jvc RX-8030v and i have a issue with the digital audio in! My dvd toshiba RD-KX50 player does not have a digital coaxil out it only has digital optical out! But on the back of the jvc...


Read you manual, there is a page with a matrix of the audio in selectiosn that can be made for coaxial and optical on each input. Then you have to go into setting button on the right side of the unit and the "push set" knob to change the inputs for the digital audio.
My problem is, I had this all working and went to change the inputs around to add a optical DVD changer and now niether of my optical inputs are working any more. Analog is still fine.

Nov 21, 2010 | JVC RX-8030V Receiver

1 Answer

Major power surge/outage & JVC won't stay on. Clicks on and starts to cycle, then shuts down. Fuse blown? Reset button somewhere? or trashed?


If appears "OVERLOAD" before turn off, you ned change a couple of resistors of 10 ohms at 5 watts near the digital board (Optical inputs)

Apr 19, 2010 | JVC RX-9010V Receiver

1 Answer

Connecting a receiver to a computer


No. That's for connection between JVC compatible units.

Not knowing what kind of inputs your PC takes: if it has only analog RCA-type inputs, run a pair from the receiver's tape out; if the PC has digital toslink (optical) or spdif (coaxial) inputs and the receiver has some sort of digital output, use that.

You could also rig a connection from the tape out, using adapter cables, to the PC's headphone in.

Jan 18, 2010 | Audio & Video Receivers

2 Answers

Jvc rx-5020v dolby digital problem


Also...If your BluRay player only has a optical output for audio you will need to swap the inputs on the JVC rx-5020v. Press the "settings" button repeatedly until "digital in" appears on the display. Now use the "adjust" up and down buttons until DVD is selected as option 2. It will look like something like: 1CD2DVD Note: this may bugger any other previous setup you have.

Feb 02, 2008 | JVC RX-5020VBK Receiver

1 Answer

Getting no audio to game systems, pc connect won't connect


Hi there,
I also had the same problem when using my optical output for DBS and DIGITAL DVR/DVD.. you need to change the setting for this by on the remote changing to either analouge..rca sound input or Digital...for Optical input. The same problem cuaght me oput for a long time as well. The button is when you slide down the remote cover and the button is called analoug /digital

Dec 30, 2007 | JVC RX-D301S Receiver

Not finding what you are looking for?
JVC RX-9010V Receiver Logo

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...