Question about Vacuums

1 Answer

We just moved and the movers didn't pack my Miele vacuum, they simply transported it as is. Now the piece that is supposed to interlock from the hose into the canister seems to be missing. Can you tell me how to get a replacement piece?

Posted by on

1 Answer

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=730491
Generic problem for all Vacuums
We just moved and the
Posted by trumbull on Jul 02, 2008
We just moved and the movers didn't pack my Miele vacuum, they simply transported it as is. Now the piece that is supposed to interlock from the hose into the canister seems to be missing. Can you tell me how to get a replacement piece?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. If you still have your owner’s manual then you can contact the Miele Factory cust serv and they can direct you to the parts dept and if you check your owner’s manual it may give you the part # on the schematic of what you need. Also, you can check with the local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://miele.com/ Customer Service, Repairs, Parts 1-888-785-2828
Mailing address listed below:
Miele, Inc
9 Independence Way
Princeton, NJ 08540
Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jul 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Miele S 558 hose keeps powering down while vacuuming. I understand that the newer SES 125-3 hoses are supposed to correct the problem. Before I buy, I'm wondering if this has proven to be true.


Debra, Searched the net. and the problem does seam to be poor/faulty circuit board in the hose and the SES 125-3 replacement hose is to be the fix. You could dissassemble first and clean the contacts first, to see if you can correct and extend the life of old hose. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
just bought Miele s558 Silver Moon seems like it from 2000 or so If it in...
My Miele S5980 is cutting out How do repair the hose to fix it
Amazon com Miele SES125 Vacuum Cleaner Deluxe Electric Hose Miele Vaccum...

Jul 08, 2016 | Miele Vacuums

1 Answer

Why won't brushes go round


Hi, it's Jeremy from Crucial Vacuum.

There are a few potential solutions you should try. First, check your vacuums brushroll. It may simply be jammed and if so just remove any debris that is preventing it from spinning. If that does not work the issue may be related to your brushroll bearings. Try removing the brushroll assembly and clean all the debris from the brushroll bearing.
If this does not work, the issue may be related to your vacuums belt. Over time the belt can become stretched out, broken, or simply fall off. If the issue is related to your belt, you will need to purchase a replacement belt.

You can purchase direct your replacement Miele vacuum parts from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.crucialvacuum.com/miele.html

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Jeremy Lerner
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Jul 17, 2014 | Miele Vacuums

1 Answer

Miele Silver Moon Losing Suction


if there's no blockages and filters all OK it's probably the suction fan that as worn down and not creating as much suction..

May 02, 2013 | Miele s558 Silver Moon Vacuum

1 Answer

How to take apart to replace power cord


Hello,

In order to access the cord on the Miele S183 upright, you'll need to first remove the handle from the vacuum cleaner. There is a large screw that holds the handle in place that is located under neath of the lower cord wrap hook. Simply remove this screw, and slide the off the vacuum by pushing the handle towards the back of the machine.

Once you have the handle removed, now ope the bag door as if you were going to replace the vacuum bag. You'll see two screws directly above where the bag fits inside of the machine. These two screws will open up the switch and cord housing and give you access to the electrical cord.

You'll see that there are two screws that secure the cord as it comes into the vacuum from the back. Remove both of these screws so that the cord is no longer secured. I think the easiest way to replace this cord is to simply cut the cord (MAKE SURE THE VACUUM IS UNPLUGGED) so that there is about 4-5 inches of the cord jacket (rubber coating around the cord) remaining. You may now just pull this cord jacket off of the cord, along with the paper insulation so you have two bare wires of the old cord. Now take your new cord and push it into the back of the vacuum so that it comes through the switch housing. Instead of having to re-secure the cord with the two screws, I've found that if you tie a small knot in the cord, this works just as well at preventing the cord from pulling through the back of the vacuum.

Simply strip the wires that are left from the old cord, and simply wire nut the new cord after tying a knot (or re-securing it with the two screws), and reassemble the vacuum cleaner. Test the vacuum only after putting the switch housing cover back into place.

If you have any questions about how to do this repair, please feel free to use the clarification request form here on the Fixya repair page. If you found this helpful, please be so kind as to rate my repair as helpful by clicking on the 4 thumbs up icons in the top right hand corner of the repair. This is what keep Fixya's repair professionals continue leaving free repair advice on this site.

Here's a link to a blown up parts diagram to help you visualize how the vacuum comes apart.
http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/miele-s183-upright-parts-diagram.gif

Feel free to check out our website for any Miele supplies that you need:
Miele Vacuum Bags, Filters & Belts

Thanks again for rating my repair,

Chris J.
GoVacuum

Apr 07, 2010 | Miele S183 Powerhouse Bagged Upright...

1 Answer

The wand that connects to the power head at the powerhead connection broke(sheared off) fine crack


Hello,

Unfortunatley the Wand for your Miele is sold as an entirely assembly only. Miele does not sell pieces of this wand separately. In order to fix your wand you'll need to purchase a new wand assembly complete.

The wand on your Miele is the Miele SET210 Wand. Here's a link if you need to purchase one;
http://www.govacuum.com/miele-172.html

I would probably guess that your wand broke off right at the bottom where it connects into the power nozzle. Unfortunately this is the weakest part of the wand as you can probably see. The wand narrows into a thinner plastic here, and I've seen a few wands crack off right on the bottom part.

Please feel free to request a repair clarification if you have any questions about how to repair your vacuum.

If you found this helpful, please be sure to rate it by clicking the thumbs up icon. I really appreciate that.

Chris J.

Mar 21, 2010 | Miele s558 Silver Moon Vacuum

1 Answer

My Miele Silver Moon "Reset" light is blinking. What do I do?


Greetings from GoVacuum,

Ahh yes, the Silver Moon. One of Miele's best made vacuums ever! So good that out of all the different vacuums that I could of chose for my home, the Miele S558 Silver Moon was the one I chose.

When you're Reset button is flashing, this simply means that it's time to replace the HEPA filter on your vacuum cleaner. Miele included this feature on their upper end models to alert the user when their filter needed to be changed.

The Miele Silver Moon uses Genuine Miele S-Class HEPA Filter for S300i/S600i, and Miele S7 Uprights. Miele Part # 04854915 (replaces 04854911) Which can be purchased from GoVacuum for $52.95 with free shipping.

Once you have installed the new HEPA filter, simply press down on the flashing Reset button to restart the 50 hour internal timer inside. Miele recommends to replace this filter after every 50 hours of vacuuming.

If this answer was helpful, please click on the helpful Thumbs Up icons in the top right hand corner of this Solution.

If you have a repair that you would like explained, please check out our Q & A website, askgovacuum.com.

Thank you very much,

Chris Jones
GoVacuum.com

Feb 19, 2010 | Miele s558 Silver Moon Vacuum

1 Answer

Miele Solaris height adjuster arm won't snap back in


Maybe this picture will help, put the pieces together, then it sits directly under where #230 in the pic.

2da4be9.gif

Mar 25, 2008 | Miele S514 Solaris Turbo Plus Vacuum

2 Answers

Miele Vacuum cannister


Most times you have to replace the neck on the powerhead. Sometimes the switch in the handle of the hose will have a bad solder connection. But S300 is not a good model number, also the powerhead has its own number on the bottom, so couldn't look up parts for you.

Feb 21, 2008 | Miele S300 Bagged Canister Vacuum

1 Answer

Miele s234i vacuum


could be the speed control # 01725370 and would sell for close to $100. Or it could be the control # 01741590 and would sell for about $50

Nov 18, 2007 | Miele S318 Bagged Canister Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...