Question about GPS

1 Answer

I have a garmin streetpilot i3 and it cannot load the satalite

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 250 Answers

Hello balander,

In order for your GPS to calculate its own location, it needs to receive data reports from four or more GPS satellites. In order to receive these signals, the receiver must have a clear view of the sky. The GPS may be unable to receive these satellites if it is used indoors, inside of a vehicle (without an external antenna) or is around obstructions such as tall buildings, trees and local terrain such as mountains and hills.

I’d recommend that you try operating the GPS outdoors in a clear area away from obstructions. Turn the GPS on and allow up to five minutes for it to acquire satellites and get a “lock” on its current location. If it isn’t able to do this then your GPS or the antenna may be damaged and in need of service.

Best Regards,
Ken
"Go Ahead. Use Us."

Posted on Jul 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset streetpilot i3 it cannot find any satellites


"switch off your i3, press and hold down the arrow button, then the wheel and finally the power button. Hold all three buttons down until the i3 switches on. Select 'Yes' to erase all user data. Follow the instructions and again leave your i3 outside for up to 40 minutes."

From a Garmin help page.

Jun 13, 2010 | Garmin StreetPilot i3 GPS Receiver

1 Answer

Need a manual for Garmin Streetpilot i3 GPS receiver


http://www8.garmin.com/manuals/917_OwnersManual.pdf

Feb 12, 2009 | Garmin StreetPilot i3 GPS Receiver

1 Answer

Garmin sreet pilot i3


Hello werner26,

You can download software for the StreetPilot i3 on the Garmin website at this link.

Best Regards,
Ken
"Go Ahead. Use Us."

Jul 23, 2008 | Garmin StreetPilot i3 GPS Receiver

2 Answers

Garmin Streetpilot i3 GPS cannot load map to memory card


The Garmin C340 comes preloaded with maps while the I3 require that the maps be installed onto a micro sd card.

You can place the micro SD card into a SD adapter and use a regular card reader to download your maps. When the software ask for 'Device' to download to use the drop down arrow and find your drive letter associated with the card reader. Using a card reader will be much faster since the it is ubs 2.0 vs ubs 1.1

You could also go to Garmin website and download and install the USB drivers, see link below.

http://www8.garmin.com/support/agree.jsp?id=591

Dec 27, 2007 | Garmin StreetPilot c340 GPS Receiver

4 Answers

Garmin Streetpilot i3 GPS cannot load map to memory card


haveing a hard time trying to download any updates. I dont have the disk eather for my unit. I have the streetpiolt 2720

Sep 24, 2007 | Garmin StreetPilot i3 GPS Receiver

1 Answer

Cannot load map in my Garmin Streetpilot i3 GPS


i dont think you can upload maps to an i3, it can only load pre-loaded maps on micro-sd cards.

Sep 22, 2007 | Garmin StreetPilot i3 GPS Receiver

4 Answers

How do i reset my garmin i3 satnav


Press arrow, wheel, Power, in that order and hold down

Jul 01, 2007 | Garmin StreetPilot i3 GPS Receiver

2 Answers

Problem loading maps to ubs card


The i3 comes with a 128MB micro SD card - first can you be more specific as to what you refer to as "not recognized"? Do the usb drivers install correctly and after installation is the i3 recognized by your pc once you hook it up with the USB cable? Is the micro SD card in place? Is it all the way in the slot?

Jun 29, 2007 | Garmin StreetPilot i3 GPS Receiver

Not finding what you are looking for?
GPS Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

66219 Answers

Will Halftowaite

Level 3 Expert

503 Answers

The Knight
The Knight

Level 3 Expert

71037 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...