Question about Kenmore 22422 Top Load Washer

1 Answer

Clothes stuck under agitator pan

I have the kenmore elite calypso top loader. My bedsheet gets stuck under the aagitator plastic pan, and I cant get it out even after the cycle is over. How do I remove it. I was thinking of taking off the agitator plastic pan but Im thinking there has got to be an easier way. Is there?

The pan goes up and down like it is supposed to during the wash cycle.



Posted by on

  • Wiki_Rookie Sep 21, 2008

    I have the exact same problem - either whole pieces of clothes or half of them sticking under the plastic agitator assembly

×

1 Answer

Remove the center plastic cover with a little flat scre driver,
then remove six screw size 10 around
lift the round plastic base for you to remove the bedsheet.
VERY important qhe putting back the six screw to tigh them not 1,2,3,4,5,6 clockwise, go 1,3,5,2,4,6. Hope this help

Posted on Sep 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove agitator?


look for a screw on the top and take it out if the is not one should just lift out if not fixed in

Jul 27, 2014 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

How can i remove clothing stuck in my kenmore elite oasis?


if it is up under the agitator just remove the agitator,,,,pop the cap off with a screwdriver then remove the 7/16 bolt and lift out whole assy!

Feb 23, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My kenmore elite calypso top loader is getting no power


It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 05, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Agitator looks like its stiped on my kenmore elite top load washer


kenmore top loaders have two piece agitator .down inside there are 4 little plastic pieces called dawgs .top should rachet in one direct. haundi24

Jul 03, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Stops in the middle of rinsing...leaves some water at bottom-


Calypso...The pumps fail often. They have redisigned one that theres not as many problems with, but if you still have the original, this is deffinatly the problem. As far as clothes getting stuck, the U-Joints wear out and cause too much play allowing things to get stuck. Total for this repair parts + labor will usually run about 500-600. There was a class action lawsuit for this machine and they no longer make it.

Mar 08, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore elite calypso top loader clothes still wet after spin


more than likely the machine has a bad clutch or motor.. in most cases it is cheaper to just buy another top loader.

Mar 06, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Clothes stuck under agitator pan


You'll need to remove the agitator.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 08, 2009 | Washing Machines

1 Answer

Kenmore Elite Calypso Washer agitator malfunction


you either have too much stuff in it or something that gets under
the agitator or it has a weak transmission

Mar 16, 2008 | Washing Machines

1 Answer

Washer pulling clothes under agitator


The gap between the wash plate and inner basket has widened.
Part #WP285903 retail $65.75

Nov 05, 2007 | Whirlpool Calypso GVW9959K Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...