Question about Alpine Car Speakers & Subwoofers

1 Answer

How to bypass alpine cva-1004 to play while driving

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 91 Answers

Doing so is very dangerous.
I admit it is an annoyance because some basic features you can't even control while driving.
Once again I would really suggest not bypassing the saftey feature.
If you still wan't to go threw with it there's 2 different ways. One of which is applying the e-brake ever so slightly so that the brake light comes on on your dash but could also wear out your e-brake over time doing this. The other is permanently grounding the e-brake wire that comes from the cva-1004. You must cut the wire and ground it (on the cva-1004 side of the cut wire) and insulate the other side of the wire you cut so that it dosen't interfere with the normal operation of the brake light.

Rember..... When you have an accident you were warned!

Posted on Jul 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a alpine CDE 152 head unit in my car and just put in alpine SPR 60 coaxial speakers in the rear. thought the head unit would be enough and want more punch from the base.. do i need an amp or i


get the alpine ktp445 mini amp ,it should be compatible (check your manual for your HU it will say ) its a plug and play install and you will hear a great improvement as I did and still got mine with the alpine cda 117 .

Apr 04, 2014 | Alpine Car Speakers & Subwoofers

1 Answer

I do not get radio reception but I can play CD's


Hi,

The radio reception will depend on your location, if you are driving on an area that has no reception then you will really not get anything, but yes you can always play your cd's since they do not require reception signals.

Jul 08, 2011 | Alpine Car Speakers & Subwoofers

1 Answer

My radio do not play my DVD on the monitor said "picture off for your safety! Why is that?


They usually do that when they are hooked up through your e brake so you cant drive and watch movies, so try pushing the e brake down

Apr 30, 2011 | Alpine Car Speakers & Subwoofers

1 Answer

Cva 1003 STERIO. (ALPINE) i dont have illumination wires, will this mean that my sterro wont work?


that just means that the backlighting for the display will not switch on and off, or dim, with the dashboard lights, the display will be lit all the time.

Mar 12, 2011 | Car Speakers & Subwoofers

1 Answer

Don't know how to set the clock on the 9887 in-dash reviever


From the online manual: http://support.alpine-usa.com/products/documents/OM_CDA-9887.PDF
1: Press and hold Func./Setup for 2 seconds 2: Turn the rotary encoder to select General and then press play/pause/ENT 3: Turn the rotary encoder to select Clock Adjust and then press play/pause/ENT 4: Turn the Rotary Encoder to set year 5: Press play/pause/ENT 6: Repeat steps 4 & % to set month/day/hour and minute

Mar 05, 2011 | Alpine Car Speakers & Subwoofers

1 Answer

Brand new subs sound blown? wireing?


crackling noise or really bad distortion check wires and if blown send it to alpine

May 16, 2010 | Alpine Type-R SWR-1042D Car Subwoofer

1 Answer

Hey type x blew the cone off of it and reattached with glue sub plays fine but ugly. no warranty how much to recone through alpine??


You don't have to buy a recone through alpine. You can, but it will be cheaper to go to the website Fixmyspeaker.com. Go to service request and full that out info. They can make a exact cone and you wish. To go through alpine you have to go to their website.

Jan 22, 2010 | Alpine Car Speakers & Subwoofers

1 Answer

Just installed my cva-1004 in my truck and all connections are good get dvd picture but no sound do i have to have the remote to select inputs i also hooked amp and subs up amp to the sub rc's at the back...


Hey Ryan I have the same thing dude has and my sound only works when I have my subs are hooked up. Without my subs hooked up I have no sound at all. Do you know how I can fix this?

Jan 26, 2009 | Car Speakers & Subwoofers

1 Answer

Alpine IDA-X300 not playing mp3


try recording a cd as a wma instead of mp3 format. i had this problem before and that worked for me

Jan 11, 2009 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Speakers & Subwoofers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Alpine Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...