Cursor won't move to the right - RIM BlackBerry? Curve 8330 Cellular Phone

here ur pc is recognizing ur external hardware that is mouse but cursor is not moving this indicates that bluetooth connection is good and problem comes with the mouse. i advise to meet a good technician and there is nothing to do with it further.

Buy a new one or slam it as hard as u can

Press F3 It should have a keypad emblem with an x across it.

I want you to attach an external mouse and see if you can get the cursor to move. If it does, you have a defective driver. Microsoft can diagnose and fix that problem in three easy clicks. CLICK HERE for the diagnostic and fix.

buy a wired mouse,simple,plug it.will work.

Dear Friend,

On your desktop press the following key conbination: Fn + F7 if not, there must be a problem with your mouse pad. It might also be that your OS takes time to load or freeze and it make it look that the mouse is not working. You can also try and external mouse.

Good Luck!!!

It could be that your hand accidentally hit the touchpad while you were typing, which would have moved the cursor. I've done this a few times before, so I'm fairly certain that's what happened. The cursor won't move on its own unless someone is controlling it, and it's highly unlikely that you have a trojan or a virus that is doing that.

Hope this helps!

Found the manual for the player buried in a box from moving. Procedure is
1) With no DVD in player
2) Press enter while holding down shift to display parental lock menu
3) If you dont remember the password enter 8888 to access the options
4) Use cursor to move arrow to country code option
5) Use right cursor to select country code, then down cursor to move country code to US
6) Use left cursor and down cursor and right cursor to move to set level
7) Use down cursor to toggle through level options. (None removes all blocks)
8) If setting a level toggle down to password and set new 4 digit password.

Question What should I do if my TV is stuck in Retail mode? Answer Your TV may have been set to Retail Store mode, which is mainly used on the shop floor.
For home use, we recommend that you set the TV to HOME mode, which will allow you to change the settings.
To change to HOME mode follow the steps below.

1. Press the 'MENU' button on the remote control to access the main menu.
2. Move the cursor down to select INSTALLATION and move the cursor right.
3. Move the cursor down to select PREFERENCES and move the cursor right.
4. Select LOCATION and move the cursor right.
5. Move the cursor up/down to select HOME and press the 'OK' button for confirmation.
6. Press the 'MENU' button to exit the menu.

When you press ENTER to finish working in a cell, Microsoft Excel moves the cursor one cell down by default. However, you can select the direction in which you want the cursor to move.

1. On the Tools menu, click Options.
2. On the Edit tab, do one of the following:
   • To change the direction in which the cursor moves, select the Move selection after Enter check box, and then select a direction in the Direction box.
   • To keep the cursor in the current cell, clear the Move selection after Enter check box.

Note When a range or set of ranges is selected, pressing ENTER moves the cursor within the range or set or ranges only.