Question about Fisher Dishwashers

6 Answers

I have a FISHER PAYKEL dishwasher that is 5 years old. The control button is STUCK in the fast mode, and the econ button no longer lights up.

Posted by on

  • suzie444 Jul 01, 2008

    How do I do a hard reset ?Thanks very much.

×

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

U have to change your button of your dishwasher for this u have to go with a good electreonic prpaire he chrge for it $ 50 to 100

Posted on Jul 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Perhaps if you could narrow down to a specific model, a more appropriate response could be forwarded. In anycase, pls reference this or here for some reset procedures depending on the model and applicable issues.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jul 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher Master
  • 19,396 Answers

Hard reset is just unplugging power for half an hour, I do not think it will fix it.
More than hard reset you should replace the whole control panel.
The part is around $40/$60.
You find replacements here, just insert your model number in the website.
Let me know if you need further help.

Posted on Jul 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 638 Answers

Unplug the unit n replugging after some time makes machine reset.anyways for further help regarding ur washer.i will provide u with a link that has step by step instructions with diagrams n repair help to solve n rectify ur problem:
www.repairclinic.com

feel free 4 further assistance .rate the particular experts solution as fixya that helps u understand n solve ur problem

Posted on Jul 01, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 796 Answers

Sounds like the control panel keypad is shorted out on those other keys, Here is a link that may help:
http://www.applianceaid.com/kadish.html

If you need to order that part, you can go to: www.applianceblog.com/parts (http://www.applianceblog.com/parts)

Posted on Jul 01, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Did you try a hard reset first??

if no

leave the unit plugged off from the wall power for 2 hours and reconnect the unit

it may work if you are lucky

Posted on Jul 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Doesn't complete cycle. Gets stuck at 26 mins.


quite likely the control board has begun to fail . only fix will be to get it replaced

May 14, 2016 | Fisher and Paykel 23 in. DD603H SS...

1 Answer

How do i repair fisher paykel dd603 problem top drawer stuck on fast cycle, bottom drawe stuck on normal cycle


you will need to replace both draws control boards, with the dd603 control boards they have a small touch button panel on the top of the board which they didn't put a protective layer or plastic over and basically what happens is steam gets on the copper tracking and corrodes it hence the fact it doesn't work anymore, all new control boards even the replacement for yours comes with a plastic strip over the board. hope this helped

Oct 06, 2014 | Fisher and Paykel Dishwashers

1 Answer

Fisher and paykal DD. Top drawer stuck on Eco and fast wash. Buttons not responding to touch.


If this is part of warranty repair then the technician should be asked to come back and fix. Try to turn off mains power and then use a clean damp cloth and run on the program selection panel on top of drawer lid. But most likely some dirt on the underside of the panel. Need to take controller out and clean it.

Feb 28, 2014 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher paykel dishdrawer


It is likely the top panel of the drawer needs cleaning.
First turn off the mains power to dishwasher and take the plug out if accessible. Wait a little and put the plug back and turn on the mains power. If this does not fix the problem, then get clean damp cloth and wipe the panel buttons on top inside of drawer.

May 17, 2013 | Fisher and Paykel 24 in. DS603H SS...

1 Answer

How can I test the lid actuator motors


you can go into diagnostic mode by pressing keylock and start buttons together for 3-5 secs in power off mode. Keep pressing start button a few times once all lights light up and you see LS on display. Press keylock to turn on and off the actuator motors.

Dec 18, 2010 | Fisher and Paykel 24 in. DS-603 Built-in...

1 Answer

Programming


Your dishwasher drawer appears to have got stuck in some sort of a diagnostic mode. The 3 lights are a code telling which diagnostic it is in.

I am assuming you have turned off and on at the mains power and it makes no difference.

I need to check a few things with you first, but I am assuming the controller is not looking good. The easiest way to confirm this is take the controller from the top one and try it below. But you need to feel comfortable doing it.

Let me know if you want to call a technician or do it yourself.

Jun 20, 2010 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

I have a F&P DD603I with NO lcd, just lights on top at the wash control panel. The HEAVY, FAST, and RINSE lights are all on at the same time. At one point the thing was playing the national anthem...


HI- I think your controller is faulty. I've only encountered the Star Spangled Banner issue once and replacing the controller fixed the issues. You may try to unplug the power cord for a few minutes and plug it back in and see if it resets but I don't think that will resolve it. I'd give Fisher/Paykel a call and see if they can narrow it down for you, they are often helpful.

Oct 04, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Fisher Paykel dishwasher drawer won't stop.


Let's go to diagnostic test mode to see if you can retrieve the the actuator hence the tube out.
1- Press Lock button and start/pause key until the display showing up.
2- Press Power to show HO.
3- Press start button to advance the display until you see P2 for draining, if you pass, keep doing it to get it back in a loop.
4- When at P2, press lock to turn on, press a again to turn off.
5- Listen to the sound of the pump. If you hear nothing that means the pump is dead or stuck.
6- The Motor has 2 directions: one for, Rinse and one for Drain. When you done with the diagnostic, press the power button to get out of the mode.
7- If this is the case, unplug the power then remove the rack, the bottom stanless steel plate with holes then take out the rotor to clean up. It is a good design the stator is outside of the tube, so you don't have to worry too much about the complication.
8- Make a note of all the positions so you can put them back the same as they were. Good luck

Sep 08, 2009 | Fisher and Paykel 24 in. DS-603 Built-in...

1 Answer

Fisher paykel dish draw


Turn the power off to your dishwasher for about 30 seconds by flipping off the circuit breaker in your home's breaker box. When you turn the breaker back on it will have reset the dishwasher and should begin working just fine.

Aug 24, 2008 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Dishwashers Experts

isaac johny
isaac johny

Level 3 Expert

796 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gere knutson

Level 3 Expert

842 Answers

Are you a Fisher Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...