Question about Eureka 431A Optima Bagless Upright Vacuum

1 Answer

Service problem MY NAME IS AJAY GAUR AND I BELONG TO DEHRADUN.LAST DECEMBER 07,WHEN MY SERVICE REQUIRED FOR WATER PURIFIER THEN YOUR COMPANY TOLD ME THAT IF U CAN CONTRACT FOR TWO YEARS. WE WILL PROVIDE FREE SERVICE,THE FIRST SERVICE IS ON 15-06-08 MR.SANTOSH JOSHI MOB.NO.9760356529.THAT MAN COME AND CHANGE THE CANDLE AND CARBON.AFTER THAT MY WATER PURIFIER IS NOT WORKING. FROM26-06-08 NO WATER CAME THROUGH PURIFIER I HAD DO SO MANY COMPLAINT BUT NO RESULT CAME. PLEASE TELL ME WHAT CAN I DO.BECAUSE I M USING FOR THE LAST SEVEN YEARS.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Remove the inlet pipe of u v chamber and pass the water for 10 mins. again reconnect and switch the machine on.......should work now :)

Posted on May 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is Conformation number # 03079B


YOU HAVE THE WRONG WEBSITE, WE ARE FIXYA.COM, WE MAKE NO PRODUCTS.

Jan 06, 2012 | Genie Company Vacuums

2 Answers

Bissell ProHeat Rug and Floor cleaner. Won't


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
sf

Oct 20, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

It got really loud, and floods water when turned on.


your loud noise would be motor related. definitely shop service required. the water issue is different, this model is gravity fed.

Sep 27, 2009 | Hoover SteamVac F5914-900 SpinScrub...

3 Answers

Rainbow SE vacuum cleaner has no power


Invert the vacuum cleaner without the water tray installed. With the machine unplugged, give the separator a spin clockwise. If it spins easily, this is a good sign. If the bearings are good on an SE, you should hear the faintest of rapid clicking sounds as you spin the motor. This is the sound of the brushes as the commutator segments pass under them. The brushes on SEs will sometimes hang up and not make proper contact; they are too precise a fit in their holders and the carbon dust they generate plus a tiny bit of moisture will cause them not to extend as they wear. When this happens, the brush tension spring overheats, relaxes, and it's time for new brushes and a service. Anyway, if you determine that the motor is turning smoothly (resistance or binding indicates bad bearings), install the water tray dry, plug the vac in, switch on, and give it a couple of bi__ch slaps with the palm of your hand on the side of the vac near the top. This can sometimes free up a stuck brush but the effect is likely not to last. It will, however, give indication of whether the machine might run or not after a fairly cheap repair (under 100 dollars).

Apr 04, 2009 | Rainbow 75th Anniversary Canister Vacuum

2 Answers

What is aquaguard


water guard.. it means liquid won't harm it

Jan 23, 2009 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

I have had my Dirt Devil for just less than a year. I bought it in September, '07. Last week I was using it and it suddenly stopped running. I can see no reason why. I need to find a nearby repair...


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=846706
Generic problem for all Vacuums
I have had my Dirt
Posted by mamavelda6 on July 28, 2008
I have had my Dirt Devil for just less than a year. I bought it in September, '07. Last week I was using it and it suddenly stopped running. I can see no reason why. I need to find a nearby repair station. I cannot afford to buy another one. I bought it at Kmart; it was on sale for $49.97.
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. I can see your problem but if it is anything more than a new belt or brushroll, it would be cheaper to buy as new one because the price of the part plus the labor fee will be more than the price of a new vacuum or you can buy a good used one from your local vacuum cleaner dealer in your area. If it is the motor then definitely buy a new vacuum. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://royalvacuums.com/ Customer Service 1-800-321-1134
Hours are: 8:00 AM to 7:00 PM (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 28, 2008 | Vacuums

1 Answer

Old (60's /70's??) commercial type hoover guardsman upright: connection between bag or bag cover and the main 'vaccuum' became disconnected. Can't seem to reattach.


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=754094
Generic problem for all Vacuums
Old (60's /70's??) commercial type
Posted by jaqueshardge on Jul 07, 2008
Old (60's /70's??) commercial type Hoover guardsman upright: connection between bag or bag cover and the main 'vacuum' became disconnected. Can't seem to reattach.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Most of the older Hoover Comm’l type vacuums have a shake our bag with a slide on clamp – so you would keep the clamp & then either the bag usually is wired on @ the bottom of the fill area & would need to re-attach if the outer bag is still in good shape. If not then I suggest that you replace the bag and clamp if needed. include the brand name & model # with your request to either company. Questions? Contact the Hoover website or Hoover cust service @ the info listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.




Jul 07, 2008 | Vacuums

1 Answer

Brush won't turn


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=751045
Generic problem for all Vacuums
Brush won't turn
Posted by andbecks on Jul 07, 2008
Brush won't turn

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Without knowing the brand name and model #, the reason that your brush is not turning might be you may have a broken belt (always use genuine belts from the brand name manufacturer) and it needs changing, or the bearings in the brushroll are froze up and it would need new bearings or a genuine replacement brushroll. The belt change should be done every 4 to 6 months for the best cleaning, and to store the extra belts in a Ziploc bag in the refrigerator. The next time you request a question, please have a brand name and model # so I can give you more accurate information.

Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 07, 2008 | Vacuums

1 Answer

Electrolux Oxygen Ultra


The problem is that Electrolux sold a portion of the company to Eureeka, so the Electrolux you are familiar with is under the name Aerus-Electrolux. Aerus vacuums are still produced with the same high quality as always, and still are made in the USA!!!

Feb 10, 2008 | Electrolux EL7020A Oxygen 3 Ultra Canister...

1 Answer

Fantom Canister


It sounds like you have a hose problem. You should be aware that the Fantom company went bankrupt many years ago. I know that the Fantom name was bought by another company and there may be Chinese units sold under that name, but service and parts availability is an issue. There may be an issue with the power delivery to the powerhead. This is through the hose, from the canister connection and down the wand assy. You should check the continuity from the canister down to the powerhead.

Dec 12, 2007 | Fantom Vacums Lighting Canister Vacuum

Not finding what you are looking for?
Eureka 431A Optima Bagless Upright Vacuum Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...