Question about Hotpoint 18 in. DC27 Slim-Line Built-in Dishwasher

1 Answer

Dishwasher stopped and 'wash' light flashing

This has happened after a recent power cut any suggestions?

Posted by on

1 Answer

Try disconnecting the power for an hour or more then try again.

Posted on Jul 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FDB4315LFC2 runs then stops and flashes pf ?


Good Morning Friend,

I understand that your Frigidaire dishwasher, model# FDB4315LFC2, starts and then stops, and flashes a "PF" code when it stops. The "PF" code is stating that there has been a power failure. There could be a possibility that your dishwasher is losing power mid-cycle. I suggest checking your home's circuit breaker, the wiring to your dishwasher, and if you have a cut-off switch, checking that as well. I also suggest resetting your appliance, by shutting the power off at your home's circuit breaker, for 20-30 minutes. Restore power and start any cycle. If further troubleshooting is needed, I ask that you please let me know the error codes displayed on your appliance. Hope this is helpful.

-Best Regards-
WP

Jun 09, 2014 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

Eidw6105gb1 dishwasher lights blinking took toe plate off the wash pump light is on but the unit washes great cound that control be sensing a but wash pump even if the pump is working?


Good Afternoon John,

I see that your Electrolux dishwasher, model# EIDW6105GB1, has all the lights blinking and is revealing the wash pump light. This could just be a false error and would need to be cleared or it could mean that the wash pump is going bad. You can try resetting the appliance, by cutting the power at the circuit breaker for 20-30 minutes. When power is returned, start a cycle. If the lights are still flashing and revealing the wash pump light, I suggest either contacting the manufacturer or maybe a local authorized dealer. Hope this helps.

-Best of luck-
WP

Mar 26, 2014 | Electrolux 24 in. EDW5500DSS Stainless...

1 Answer

Electrolux dishwasher not completing wash cycle and all lights flashing on door control panel and the 'wash pump' error light behind the lower kick space panel was flashing.


Good Morning friend, thanks for your post!

After researching the issue you are having with your Electrolux dishwasher it is possible that resetting your appliance may help. I would disconnect power from your dishwasher by unplugging it or flipping the household breaker for roughly ten minutes. If this does not resolve your issue I would recommend seeking assistance from a professional to properly diagnose and repair your dishwasher. -T

Jan 23, 2014 | Electrolux Dishwashers

1 Answer

The CLEAN light is flashing on my Kenmore QuietGuard3 , but it won't clean anything. It starts a cycle for a few minutes, stops and starts flashing clean again. Any suggestions?


You will have to reset the dishwasher. First try and turn off the mains power and back on after a short time. If the clean light flashing starts again then you go through the hard reset procedure.

press NORMAL WASH then HEATED DRY buttons one after the other until all the lights on the board lit up (3X's). The dishwasher will enter into a cycle; Press Cancel. This should stop the flashing.
If you are supplying dishwasher from hot water inlet then make sure the inlet water temperature stays within the recommended range of 145 deg F.

Apr 21, 2013 | Dishwashers

2 Answers

Whirlpool adp 6600 will not function start light is just flashing


Whirlpool adp 6600 will not function start light is just flashing. Waht di I do?

Sep 17, 2009 | Whirlpool 24 in. ADP6940 Dishwasher

1 Answer

Whirlpool dishwasher stopped mid cycle


My whirpool dishwasher model ADP4601 is flashing a green light three times and is not doing anything else - any suggestions

Aug 10, 2008 | Dishwashers

1 Answer

ASKO 1595


yes have you tried what i suggested yet

Mar 29, 2008 | Asko D1776 Stainless Steel Built-in...

2 Answers

ZDT5052 flashes quickwash light


Tarvi...I don't know what the problem is...hard to diagnose these things. If the unit is working correctly, I suggest that you simply cut the power for a few minutes and then restart it. That may clear our a trouble code.

Dec 06, 2007 | Zanussi 18 in. ZDT5052 Slim-Line Built-in...

3 Answers

All the lights are flashing on Maytag Quiet Series 300


Try pressing heated wash, heated dry, then heated wash, heated dry. It should reset it. Also try pressing and holding the cancel button for 5 seconds to see if that works if the other doesnt.

Sep 23, 2007 | Maytag 24 in. MDB5651A Built-in Dishwasher

1 Answer

FDW 60 Float and Filter Clean problem


Blockage in internal pipework causing water not to circulate fast enough to stop switch activating. Regards Advisor

Aug 17, 2007 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Hotpoint 18 in. DC27 Slim-Line Built-in Dishwasher Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...