Question about Samsung SCX 4200 All-In-One Laser Printer

1 Answer

SCX-4200 cannot make multiple copies

I have been sent a replacement unit and this unit is the same.
If you put something on the flatbaed scanner and make a single copy it works, press the copies button a few times or use arrow buttons to increase the number of copies and press start and nothing happens.

I am expecting my 3rd unit shortly. Can someone else confirm my problem.

Posted by on

  • b1gduk Jul 01, 2008

    Hi,



    You are on the money here, the button you have to push before pressing "Start" is marked OK and is between the left and right arrow keys. Once you press OK then you can press "Start"



    The Samsung Documentation on thier support site does not state this, only to select the number or copies with the arrows and press start.



    Thank you !

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 134 Answers

I believe on this unit that when you increase the # of copies, you have to press the set or enter button to accept the amount, then press copy. Most small Samsungs are like that.

Posted on Jul 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a samsung scx 4200 the glass cracked and needed to be replaced, now the scanning mechanism keeps wanting to go in just one direction, so when it reaches the very left the cogs continue tuning and I...


Dear
The scanner glass may restrict the movement of the CIS. try to clean the foreign particle from its gear assy. Its also the scanner cable fault replace with anew one.
Thanks.

Nov 29, 2012 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Samsung 4200 gives scanner error


Hello,
there is 3 problems whit SCX 4200 scanner:
1. Defective ribbon cable
2. Defective scanner motor
3. Defective scanner lamp
or
ribbon cable is unplugged - open rear cover to chek this!
For 1,2 and 3 - visit Samsung service
Good luck!

Apr 05, 2011 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Samsung printer SCX 4200 LSU error does not correct after having been re-booted


hi

problem is your laser scanner unit.

you have to replace new LSU Unit.

calling for service is suitable.

Feb 09, 2011 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Samsung scx-4200 does not give me the option to scan to pdf file


I used a program called SmarThru 4 with the same printer-scanner. Works. Give it a try :).

Jun 29, 2009 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Samsung scx-420f series pcl 6 reads scanner locked.


You can solve this problem by entering TECH menu and then --> Data setup --> Clear all mem. And ypu will be ok :)

Jan 07, 2009 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Small problem with SCX-4200


I have the same issue but it resolved by itself.  I turned off the printer for a night and test again, it works.

Mar 14, 2008 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Sharing the scanner


no it is not possible it will only share fax and print mode but not the scanner.

bye

Nov 19, 2007 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Sharing with Samba/Cups


To my best knowledge, you cannot. The drivers and scanning software on your unit are not designed to support network protocols. Your unit does not come with an Ethernet adapter and it is not available as an option. When Samsung fits an equipment with a network card (such as the SCX-4521FN) the drivers and software are enabled for network use. By the way, your toner will only last for 3,000 pages. Are you sure it's a good idea to share such such a small unit over a 10 PC network?

Sep 25, 2007 | Samsung SCX 4200 All-In-One Laser Printer

Not finding what you are looking for?
Samsung SCX 4200 All-In-One Laser Printer Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...