Question about Office Equipment & Supplies

2 Answers

Projector Problems I have a Mitsubishi XL2U Projector. The image shows clearly except a green "spot" or blur on the image. When I have an image or presentation a certain spot (usually the middle) is not clear. When the screen is blue, it shows a green hue. Do I need a new bulb, or is it something else?

Posted by on

  • tomark Jul 12, 2008

    I have the same model and same issue. I just replaced the bulb with no improvement. All I can come up with is maybe the mirror or lenses have become discolored with age or use. A new bulb is not the solution.

  • tomark May 11, 2010

    This is a Projector unit, there is no screen that I am aware of, only a bulb some mirrors and the lenses. The picture must originate from inside, but Im not sure the sporce is an LCD pannel. Can you clarify?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This is caused by dust on one of the LCD panels. Use a liquid air can to gently clean it.

Posted on Sep 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Hello,

There is some problem in your LCD Panels. Service the optical unit ant retry.

regards

Viren

Posted on Jul 16, 2008

  • Virender  Dhiman
    Virender Dhiman Jul 16, 2008

    This is not the Lamp problem

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IMAGE PROBLEMS I HAVE LINES AND BLACK SPOTS ALL OVER DISPLAY


Sounds like multiple problems the spots are the dlp/dmd needs replaced the lines are a bad cable or a loose wire inside. Here is a similar model video http://www.youtube.com/watch?v=775YOs-aOPc&feature=share&list=UU_Iacxxa-E63l6FhQjkcH8A

Nov 10, 2013 | Mitsubishi EX240U Projector

1 Answer

I have an XL2U projector that when is on displays the image blured. When I go to the menu it displays the menu items but in three colors blue yellow and red any ideas?


It sounds like a polariser lens has failed, if so it may be cheaper to purchase a new projector than have it repaired.

Hope I was of assistance to you

Jan 06, 2011 | Office Equipment & Supplies

1 Answer

Panasonic PT-60LCX64. What would happen if you


you won't get another warning for 2000 more hours on a lamp that is good for only 2000 hours (give or take). so, if you don't replace it, you run the risk of the lamp exploding at the end of it's life, sending shards of glass and mercury dust throughout the projector.

Nov 09, 2009 | Mitsubishi VLT-XL2LP Projector Lamp for...

2 Answers

Infocus LP 70 projects a blurred display


Go to control panel and reset hardware configs that way.

Jun 29, 2009 | InFocus LP 70 Multimedia Projector

1 Answer

Showing to of the same thing and colors


ghosting or convergance issue is what u have. if the image is in diff colors then deff a convergence issue. however, if the image isthe same color or shaded from the original then this is ghosting. this may be corrected through the menu settings(sinc settings).

Jan 15, 2009 | Toshiba TLP-380, TLP-780, TLP-781UF...

1 Answer

Mitsubishi XL8U Projector


Hi terry2421

No this is not the bulb. You will have to get the Mainboard repaired at a service provider. Losing signal and a discolouration showing up is a clear indication of a faulty Mainboard.

Get a quote first , because some service providers overcharge on these sort of repairs. The most you should pay is $150.

May 20, 2008 | Mitsubishi XL8U Multimedia Projector

2 Answers

Mitsubishi xl2u projector


also have the same problem

Jan 29, 2008 | RIM BlackBerry Pearl 8100

1 Answer

Image flickers and colors off


I have the same problem as philvo. I was watching, the projector was operating normally, I heard a snap, there was a flash of light behind me I believe, and my Mitsubishi XD300U projector went to a black and white picture. That is all it will show now. All lights show normal operation. I would like to know if it is worth getting repaired. Does anyone have any ideas?

Jan 07, 2008 | Mitsubishi XD300U Multimedia Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

71338 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...