My HP 4355, doesnt work, I can receive one fax, but before the first fax I receive it doesnt receive anymore. Working in auto-receive.
Then I have to hung up the phone and It works again but only for one time...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the "Mode" was "Tx" or "Snd", you tried to send a fax,
and the other fax machine did not answer, then it was either turned
off, or out of paper or ink. If the mode was "Rx" or "Rcv", it means
your fax machine tried to receive a fax, but none was sent. If your
machine was in TEL/FAX or FAX mode and it received a regular call, the
caller heard the fax tone and hung up. If your machine was in ANS/FAX or
EXT.TAM mode, it most likely means a regular voice caller heard the
answering machine and hung up without leaving a message.
Go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set. Make sure the phone wire which you insert in fax machine getting proper dial tone and getting out going calling facility. Have a nice day and do not forget to rate please...!
make sure the phone lins is conncetd it is working and it is getting the call when someone call on that no.also check
Fax: go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set.
If u have windows xp u can enable fax automatically . for that u want to do this one only
Go to START --> control panel in that select ADD and Remove option . in that menu in left side ADD and Remove windows components is there so select it after opening that window enable FAX service give next and finish . it will start to activate.