Question about Epson TM-H60000II Thermal Printer

1 Answer

Ink too light

When the recript is printed we can hardly read it

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hi
If this is when the printer prints from the document feeder infront it uses a ink ribbon to do so.All you have to do is open the front cover and clip it off. Then remove the housing that covers the printhead. There are two screws one on the right and one on the left side.Once the cover is off you will see a plate that the printhead prints against with two screws holding it, adjust them slowlyanti-clockwise one or two revolutions and then test. if this plate is too far from the printhead it prints light
The other way to do it is to open the the slip printer at the back and flip it up ,then you will see a black frame with two blue arms on the left and right clip it loose and fold it black. Now you will see the plate on it and adjust it accordingly
i love these printers as hey are easy to fix and i became a guru on them
Glad to be of help if you have any questions mail me

Posted on Jan 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The document can hardly see the print on the page and it is not the ink?


Take out the ink cartridge and se if it ha ink in it. Also inpsect to see if ink has leaked out.

Nov 06, 2013 | Office Equipment & Supplies

5 Answers

Will not print. color ink cartridge light keeps


..."Open the ink supply andgently move the ink cartridges to the left. Then reach in to the rightside and you'll find a small (1/2 x 1 inch) sponge. Push it down andoff/on the machine. try it now. or ...go to where I found out more than I should know about Canon's and where I got my quote...http://www.fixyourownprinter.com/forums/inkjet/39177 good luck.

Oct 21, 2009 | Canon PIXMA MP240 All-In-One InkJet...

2 Answers

I replaced a new black ink catridge, the black is


For that problem kindly try doing the ff:
  • Re-seat the inks both color and black then try printing
  • Re-seat the Printhead of the printer then print again
  • Try changing the print quality to best then try printing
  • if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

Sep 23, 2009 | Kodak ESP 5 Printer

1 Answer

Prints Blank Pages...even though ink is full.


problem is likely to be the print head, the ink can dry up inside the print head and block fresh ink from flowing.

you can get print head cleaning solution from ebay, which sometimes works, or else go here to get your replacement print head

www.kodak.com/gb/en/consumer/products/printing-supplies/printhead.../default.htm

the one i have is a clip in clip out part

May 03, 2017 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Ink was low I put a new cartridge in still says low wont print.


Hi

try reinstalling the ink. if all fails call epson for replacement ink at 562 276 1300

Jan 02, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

HO 4280 does not print


if your ink light is on, you have no more ink and need to get it replaced.

Dec 12, 2008 | HP PhotoSmart C4280 Laser Printer

1 Answer

Light print of incoming faxes, cannot read


are copies light too? if not then it is sending fax, but most times it is inferior ink or drum causing the problem sometimes damp paper (try printing on reverse side as well)

Oct 31, 2007 | Brother IntelliFAX 2600 Fax

3 Answers

Printer prints lightly after changing a cartridge


i guess you have problem with the poor quality ink.
faced same problem.
i re-filled with best ink in the market and the problem was gone..
i hope that helps

Mar 21, 2007 | Samsung SCX-4100 All-In-One Laser Printer

Not finding what you are looking for?
Epson TM-H60000II Thermal Printer Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18413 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...