My daughter just callled me to find out what it will cost to replace the lcd screen on her camera..I HAVE NO CLUE can anyone help me with this problem ....what will it cost and where do I find parts? THank you
Hi everyone, I know many posts on blogs when i was looking to replace my casio lcd and every site i looked at for the replacement lcd was so high priced, and there was no way i would pay how much they wanted so i was going to buy a new camera. Then i found this guy on ebay and he had tons of lcds for sale but none for my camera and all of them were priced good and low. So i sent him a message and he told me to go to his site www.Buy202.com and i checked it out and he offers tons of lcd cheap one i bought from him only cost me $27 and i installed it myself it was tricky at 1st but you just have to be gentle i guess. anyhow anyone looking for lcds this guy is pretty cool ive got 2 from hims o far. www.Buy202.com
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
a little care should be taken to replace the LCD screen from this model, first remove the cover of the tilting mechanism of the monitor then disconnect the jig connector,open the monitor cover take out the LCD, replace with a new one.
I bought a non functioning camera like mine on ebay and put the new screen in. Not a project for the faint hearted. Requires magnification, a really good jewelers phillips and some soldering skills. The most practical solution, for what it will cost to have it done, is get another camera, there are some pretty good deals on ebay on demos and used cameras.
It sound like an on/off switch issue.
Best thing will be contact HP appropriate service center and ask how much will cost to repair it.
It might be that the reparing cost will be such that it will not be worth to repair it.
The following procedure works on the V1003. It uses the same LCD screen as the V803.
It would appear you have a damaged LCD screen. The same problem happened to my daughter's V803. The camera will take pictures fine but you will only be able to see them if you download them onto a PC. A replacement screen can be easily ordered and replaced. Call Eastman Kodak. Their parts department can be reached at (800) 431-7278 ext 3. Tell them the model number of your camera and tell them you want to order a LCD screen for it. The cost of the new screen is $31.00 + $15.00 shipping. Don't let them talk you into sending it back for repair. You are looking at a repair bill over $80.00. To replace the screen, remove all of the small philips head screws that are in the chrome band that runs around the center ridge of the camera. After removing the screws, you will be able to separate the rear half of the camera from the front half. The LCD screen is pressed into a rubber gasket in the rear half of the camera. You will see that there is a small, flat orange ribbon cable that connects the old LCD screen to a black connector on the camera's motherboard. Using a VERY small flat blade screw driver, pry up the top tab on black connector. This will unlock the connector and allow you to remove the flat ribbon cable from the black connector. Remember the orientation of the old screen and its cable as you will want to replaced the new screen and cable exactly the way the original was installed. Using the same small flat blade screw driver, pry out the old display. Install the new display into the rubber gasket into the back half of the camera. Insert the ribbon cable into the mother board's black connector and press down on the panel to lock the cable into place. Lay the rear half of the camera face down on the table (rear buttons facing down) and place the front half of the camera over top of the rear half. This will allow you to put the camera back together and help prevent the new LCD screen from falling back out. The LCD screen has pads attached to the surface behind it. When you reinstall the front half of the camera, those pads help hold the LCD screen in place with pressure from the motherboard. Replace all of the screws. If you did it correctly, the camera will operate like new. Last word of advice. Buy a padded hard shell case for this camera. These cameras are well known for LCD screen failures due to shocks and drops.
Replace the camera - these items don't get repaired.
How ever if you are a nimble fingered person with some fine tools- taking it apart with care you may fine it is nothing more that an tiny connector has become unplugged.- But no repair shop will waste costly time time only to find out it is worse as there are generally speaking no spares.