Have a Samsung desktop - how do I attach printer cable?

Just connect the usb cable to your printer only hp or cannon photosmart printer will print your pix directly attaching usb cable select the pix and send to the printing options in main printer menue

Hi Gene,
Most newer printers today are connect via USB. If it's an older printer, it might be connected with a Parallel cable. Pretty much all PC's today have done away with the old Parallel connector and have gone to USB. If your printer has a Parallel connection, it might be time to get either a Wireless printer, or one with USB connections.

Hope this helps

Gary

hello

if you need to install the printer , go these links -- drivers, manual and installation guide

prepare your power cable and data transfer cable.

go to the last link, download the driver (at the word FILE, select it and download) for corresponding operating system you have, save on desktop. disconnect the printer from computer, install drivers. Follow instructions and finally reconnect printer to power and to computer. restart computer. printer will function.

http://www.samsung.com/in/support/detail/supportPrdDetail.do?menu=SP08&prd_ia_cd=06011400&prd_mdl_cd=&prd_mdl_name=ML-1610

http://www.samsung.com/in/support/detail/supportPrdDetail.do?menu=SP08&prd_ia_cd=06011400&prd_mdl_cd=&prd_mdl_name=ML-1610

http://www.samsung.com/in/support/detail/supportPrdDetail.do?menu=SP08&prd_ia_cd=06011400&prd_mdl_cd=&prd_mdl_name=ML-1610

http://www.samsung.com/in/support/troubleshootingguides/troubleshootingPopup.do?tsg_seq=273&visitfl=Y

http://www.samsung.com/in/support/detail/supportPrdDetail.do?menu=SP08&prd_ia_cd=06011400&prd_mdl_cd=&prd_mdl_name=ML-1610

please rate my service with 4 thumbs up

to reset it just turn off the pc, remove the cables to it, press and hold the power button for 10 sec. Reinsert the cables and turn on the pc.
Press Print Screen again and it would reset...

do you check device manager?
install new driver?

have u installed the drivers before pluging i the printer but try this after unintalling the drivers

Some TV's don't have a VGA input. S-Video cable is more common. Look on the back of your computer an see if you have an S-Video jack. If you have a TV compatible output on your computer, such as an S-video jack, just take an S-video cable and connect it to your computer and your TV. If you do not, then attach your VGA end of your adapter to your computer and use the RCA, S-video or Component Video cable to attach to your TV. After you've made all the connections, make sure you are on the correct TV video input. Press the input button on your TV or remote until you see your computer's signal.

Deifinetly. Scanning only works through the USB cable. Make sure you buy a good quality one. And do not exceed 10 ft length without using a USB active repeater extension cable.

Hi,
Please check if the monitor cable is attached correctly.
Also, if possible, try another cable to connect the monitor to the pc.

Hope this helps.