Question about Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

What is error code 2 on a canon MP210? - Canon PIXMA MP210 Photo All-In-One Printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

This steps may solve your problem.

1.Load paper correctly then press black or color button (MP210)
2. Press on/off switch to reset the multifunction device
3. Remove Packing Material MP210
4. Reset ink cartridge MP210
5. The MP210 may require repair



If your printer is new , make sure the packing material inside the printer has been removed. You should have a quick setup page and/or users manual that will show you how to remove any packing material that is inside the printer.

If this is an older printer that has worked in the past, start with step

1, 2 and 4. If this does not work contact the Canon customer s

Posted on Dec 13, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: E22 error on Pixma MP210

I had this problem as well. After turning on, there'd eventually be a whirring noise followed up by a "CLUNK" noise, and then I'd get the e22 message. Took it down to a local printer place and the guy had a quick look.

- If you open up the printer so that the ink moves to the left, you should see the white plastic cleaning bed all the way to the right. The guy showed me how this thing can be snapped into an up and down position. Mine was stuck in an up position, therefore after the guy pushed it down everything was hunky dory.

Apparently it was cos the printer needs to do a cleaning cycle before it does anything else, so with the cleaning bed in the stuck position it couldn't do it. Hope this helps.

Posted on Jan 28, 2010

pineworks
  • 4293 Answers

SOURCE: For Canon mp210. Error light blinks. Either E22 or E2

Hi there
This is a Carriage error take a good look at the carriage that the inks are in and see if they are sitting ok and also do the next incise there some thing there stopping it from moving.


Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 13, 2010

  • 412 Answers

SOURCE: error code 6000 on canon pixma mp210 stops me from printing

Hi,
Error 6000 means - The specified file could not be encrypted.
Solution: reinstall the printer driver.... it's better to install a upgraded version of driver...
Good Luck!!!

Posted on Mar 19, 2009

  • 96 Answers

SOURCE: canon mp210 error 5

Power down the printer completely. Unplug from wall.
Re-insert all cartridges. Then power up It takes a while for the test page to print. After that you should be good to go

Posted on May 28, 2010

Joed911
  • 4338 Answers

SOURCE: My canon mp210 printer doesn't

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220

  1. Start with printer off
  2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on
  3. hold the Power button, release Resume Button.
  4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons.
  5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber).
  6. Turn off the printer and turn on again

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe




I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Posted on Jan 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E5 error


The error code E5 shows that your colour cartridge is finished and the printer is telling

Read more: How to clear error code e5 - What does it mean when my mp210 canon printer has the alarm on :: Extreme Cow Answers at http://www.extremecow.com/How_to_clear_error_code_e5-qna9448.html

Hope it helps

--N

Apr 02, 2014 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

I have a canon mp210 that is flashing E 1 then 6. what does that mean ?


Error E1,6 means Ink has run out.

http://wwwflashing E 1 then 6.indiepowerpop.com/Canon MP210 Manuals/mp210_qsg_en-us_v1.pdf

navigate to this link, this the user manual of PIXMA MP210, where you can see meaning of errors and how to troubleshoot them.
thanks,

Nov 23, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

Error code 6000 on canon pixma mp210 stops me from printing


Hi,
Error 6000 means - The specified file could not be encrypted.
Solution: reinstall the printer driver.... it's better to install a upgraded version of driver...
Good Luck!!!

Mar 19, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Error code e27


While pressing reset, press and hold power.
Release reset.
Press reset 2 times.
Release power.
Press reset 4 times
Press power 2 times for shutting down MP210
Power up MP and test...
If E13, E3, E16, E6 ocured, press and hold reset for 5-10 sec
Enjoy (Flores - Romania)

Jan 14, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

5 Answers

Error code:2,114,0


HI

I have Canon PIXMA MP210 printer but problem is that whenever i given comand for print or scan than computer show "Code: 2,114,0" this message therefor printer not print or scan. so please give me solution

Thanking you,

ayyub_thakur@hotmail.com

Dec 06, 2008 | Canon PIXMA MP160 All-In-One InkJet...

3 Answers

Canon mp 210


According to Canon you should:

1. Load paper correctly then press Black or Color button (MP210) 2. Press ON/OFF switch to reset the multifunction device 3. Remove Packing Material MP210 4. Reseat ink cartridge MP210 5. The MP210 may require repair
All steps can be done individually and if the error goes away the other steps don't have to be done. Hope this helps.

Oct 06, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

3,625 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4293 Answers

old marine
old marine

Level 3 Expert

2237 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...