Question about E-Machines T2082 PC Desktop

1 Answer

T2082 Hello I recently bought this computer at an auction and know little about it.  It came with a monitor and keyboard.  Has  cables to connect keyboard and moniter to computer, which I've done.  I think I need a cable to plug computer into 110 outlet and a mouse????  If so where could I pick these up and how much should I expect to pay?  Also, how old might this computer be??    I'm in Saint Louis Mo.   THANKS     Joe

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Power cords and mice you can pickup at almost any computer supply place. The power cord should be no more than $5, and basic optical mouse can be bought for $10 -15. I have one of these machines and I think they are 2004 - 2005 vintage.

Posted on Jan 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blank screen when Gateway GM5664 turned on


How do you know your mouse and keyboard work if you have a blank screen?

What motherboard did you put in it? Did you install a video card or using a built in video card? How many beeps? Do you have a spare video card to put in the system and try that?

Feb 19, 2013 | Gateway GM5664 Desktop PC

1 Answer

EMachines T 2082 wont recognize BIOS


Unplug system
1.) locate the battery , rams and processor on the main board
2.) remove all 3
Hold power button for 30 seconds
4.) replace all 3
5.) make sure both the power connector and the processor power connector from the power supply is connected.

let me know if that works

Dec 29, 2012 | eMachines T2082 512MB DDR PC-2100 Desktop...

1 Answer

Need a link for the directions on how to connect cables to the computer. serial #105255894


Connections

> Blue 15 pin or white 16 pin colour port is for monitor.
> 3 pin female port is for power cable for Computer Tower
>3 pin male power cable is for monitor
> Purple and green colour port is for Keyboard and mouse if they are ps2 (round connector) if usb then connect in any usb port.
>Small 3 colour ports Pink,Green,Blue is for sound.Connect only the Green colour cable coming from speaker to green port
>Connect the speaker Adapter cable to the wall socket for supplying power to speakers.
> RJ45 (Ehternet port-port which looks like phone connector but little bigger will connect Internet cable if you have internet.

Connect and Enjoy

Sep 08, 2010 | Systemax Tiger (SYXS-DC-1000) PC Desktop

3 Answers

My monitor has kicked into sleep mode and won't "wake up".


Unplug all the Cables from Compaq Presario 5103 CL and leave the Keyboard, mouse and monitor cable pluged in.

Now make sure the power cable of the monitor should be pluged in and the power cable of the tower should be pluged in.

Now to check if the montor is fine just unplug the video cable only which will show no input signal on the screen. If it shows this signal the monitor is fine. Plug back in the video cable.

If the monitor is going to sleep mode it might be possible that the old computer ( Compaq Presario 5103 CL ) is in stand by mode. hit any key on the keyboard and it should come back .

If it is not in the stand by mode then do one thing. Check the same monitor with the new computer. If it is working. Perfect ..!

Do one thing now ..!

Unplug all the cables from your old system and then press the power button for 30 sec and let it go. Now plug the keyboard, mouse and the monitor try again.
If it works Perfect. If not ..!

Then you need to open the tower and check on the processor FAN is it running..? If its not running you will not get the display as the fan is responsible for the display on the screen. Otherwise...!

Check the Tower possibly the Tower is not getting the power.

Try these steps and let me know If it works

May 04, 2010 | Compaq Presario 5000 PC Desktop

1 Answer

No cable and no sound on speakers for flat screen monitor


Hello Tothelake45,
When you bought your computer, you might have received lot of cables along with it... so find out the cable that has the jacks on both the ends of the cable. The Jack looks like that shown below.
a9b0d44.jpg
So we are looking for a cable that has a jack at both the ends.. One jack goes into the soundcard of your computer (the green color coded port or the port where you normally connect your desktop speakers or headphones) and the other end goes to the similar connector on the monitor which is color coded as well (green color).
Please let me know if that works and please do not forget to rate the solution.

Thanks and Regards,
Srinivas

Apr 08, 2009 | HP Pavilion A6430F Desktop PC

3 Answers

Dell C521 Where to connect monitor?


This means that you have an external video card (which is not outside the computer). This video card will be plugged into the motherboard. That message is saying that the port on the back of the computer that your monitor is plugged into is the wrong one. You need to look for another port on the back of the computer.

Here is a picture of a VGA port that you should use if you have a VGA cable to connect the monitor (Blue Ends).
http://news.softpedia.com/images/reviews/large/VGA.jpg

Here is a picture of a DVI port that you should use if you have a DVI cable to connect the monitor (White Ends).
http://zedomax.com/blog/wp-content/uploads/2008/09/dvi.jpg

So depending on the cable and connections that are available on your computer and your monitor depends on what you have to use. I hope that wasn't too confusing. Let me know if you need more info.

Feb 12, 2009 | Dell Dimension C521 PC Desktop

1 Answer

My pc just bought will not work


if you computer has a graphics card you would find a connector on the bottom, there will be two places where you can connect you computer to, one would be on the middle and the other would be near the bottom the connector woudl look blue in colour, make sure if you have a video card installed, you would see a blue colour port near the bottom and it would be horizontal, connect the monitor video cable to that port and this issue would be resolved

Feb 05, 2009 | Dell OptiPlex GX260 PC Desktop

2 Answers

Solid amber power light


Your Monitor is not connected properly
http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

Connecting Your Monitor
1. Turn off your computer and unplug the power cord.
2. Connect the white connector end of the DVI cable attached on the monitor to the connectors on the computer.
3. Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the computer and the monitor, you can use the USB downstream on the monitor.
4. Connect any USB devices.
5. Connect the power cord.
6. Turn on your monitor and computer. If you do not see an image, see Troubleshooting Your Monitor.

NOTE: The Monitor will display full screen in White, Black, Red, Green and Blue color rolling pattern on screen if the DVI cable is not connected. This self test pattern will be displayed continually when Monitor detects that DVI cable from Monitor to PC is not connected.


* Check connection integrity at both ends of the video cable.
* Ensure the monitor and computer are plugged in to a working electrical outlet.
* Ensure power button is depressed fully.

Aug 14, 2008 | Computers & Internet

1 Answer

I have a belkin adapter which connects my 2 pcs together sharing a mouse, keyboard and monitor. I recently bought an acer slimline 22 inches monitor to replace my old bulky monitor. However when I connect...


try changing the refresh rates and resolution on the pc..
do u have a driver for that ??
and check the cable for loose connections !!
hope this works !!

Mar 10, 2008 | Computers & Internet

2 Answers

Acer L5100 install problem


I think it would get power through the Moniter so I don't think you need a power cord for the CPU. Hope this helped =)

Feb 25, 2008 | Computers & Internet

Not finding what you are looking for?
E-Machines T2082 PC Desktop Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...