Question about Keurig B100 Coffee Maker
The top needle broke off.
I called customer service KEURIG, they told this model had discontinued and there are NO PART replacement. I could give my serial # and I can get a discount on new one....
Does anyone know where I the get the NEEDLE piece replaced?
Tips for a great answer:
Nov 08, 2011 | Keurig B60 Coffee Maker
Aug 09, 2011 | Keurig B50 Coffee Maker
Jul 26, 2011 | Keurig B100 Coffee Maker
Here is a tip that I wrote that will give you some things to try that will help you get your Keurig coffee brewer working again.
Keurig Coffee Brewer not making a full cup of Coffee
Jan 04, 2011 | Keurig B100 Coffee Maker
Dec 19, 2010 | Keurig B100 Coffee Maker
Dec 14, 2010 | Keurig B50 Coffee Maker
1. Power off machine.
2. Using a metal paperclip, insert it into left side of top needle. It must insert at least 1" deep. Insert it into slot on right side and again from back of needle.
3. Remove KCup cradle. Separate bottom from top. In the top section, insert the paperclip up into bottom needle from the bottom upwards. It will not go all the way thru and this is normal.
4. Reassemble KCup cradle and reinsert it back into coffee maker.
5. Power on machine.
6. Brew a cup of water only. There may be coffee grounds in the water and these should eventually clear during the remaining steps. NOTE: A large cup brew cycle should output a full 8 ounces (235cc). Less means there is still a blockage
Sep 15, 2010 | Keurig B100 Coffee Maker
Apr 11, 2010 | Keurig B50 Coffee Maker
Jun 30, 2008 | Keurig B100 Coffee Maker
Nov 23, 2007 | Keurig B100 Coffee Maker
241 people viewed this question
Usually answered in minutes!