Question about Samsung ML 2010 Laser Printer

1 Answer

Toner Saver. How do I adjust toner saver?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

Using the Toner Save Mode
The Toner Save mode allows the printer to use less toner on
each page. Selecting this option will extend the life of your toner
cartridge and reduce your cost per page, but will reduce print
There are two ways to enable the Toner Save mode:
From the Control Panel
Press the Cancel button on the control panel. The printer must
be in Ready mode (On Line/Error green LED is on).
• If the Toner Save LED is on, the mode is enabled and the
printer uses less toner to print a page.
• If the Toner Save LED is off, the mode is disabled and the
printer prints in the normal mode.
From the Printer Properties
You can also enable the Toner Save mode in the Graphic tab of
the printer properties. For details, see Software User’s Guide.

Posted on Jul 17, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

How to ready toner not recognized


Please switch off the machine, while holding down0+8 buttons switch the machine on.
When machine starts and displays [ad] input 695 and press the start button.
Input 0 and press interupt and energy saver.
Input 971 and make sure that value is 3, if it is not input 3 and then press interupt then energy saver buttons.
Switch off the machine, wait awhile then switch the machine on.

The problem should be sorted out,

Apr 16, 2011 | Toshiba E-Studio167 Copier


How to get rid of faint copies

The most common problem that people have with this printer is that they say that the copies are faint. It could be that your toner is out of ink so make sure that the computer software and the printers display is not saying that you have to replace the toner. If it doesn't then its probably that the toner saver mode is on. to change it go to Additional Functions> Common Settings> Toner Saver Mode and change it to off. It should solve your problem . Thank you.

on Dec 30, 2009 | Canon imageCLASS D320 All-In-One Laser...

1 Answer

How to turn on the toner save for the hl 5040?

hello, in the print manager for this printer, when you pull it up, the advanced section has 2 boxes listed toner saver, the options are yes or no. make sure to select yes

Oct 11, 2010 | Brother HL 5040 Laser Printer

1 Answer

Consumes too much ink

If you are talking about IR3300, there is no ink only toner :-)

The toner goes about 10-15 000 copies with 5% of A$ coverage.

You can also turn on the toner saver under user mode (copy sett.) but you will have light copies

Jan 19, 2010 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Replaced cartridge, but print quality is dull

Make sure you toner density is set to 3. If it is, try it at 4 or 5. The other thing to turn off is toner saver.

Nov 16, 2009 | HP LaserJet 4 plus Printer

1 Answer

Printouts on my ML-2510 have horizontal smudges. I am using the toner saver mode

kINDLY change the Toner cartridge. iF YOU FACE SAME PROBLEM UPDATE US.

Nov 11, 2009 | Samsung ML-2510 Laser Printer

3 Answers

My samsung ML 1610 printer, printing very light, even though the toner is brand new.pls someone solve this problem thanks

There's a button on the top called "toner saver". when you press this is prints light to save toner. Press this once to turn "toner saver" off and print normally..

Aug 17, 2009 | Samsung ML 1610 Laser Printer

1 Answer

Faded print quality

If your toner saver is off and still getting faded quality means you mirrors and Scanning Lamp are not reflecting images properly.
Now if you are handy on printer then you need to take off glass
bb15714.jpg from printer then you need to clean ADF units (mirrors,lense lamp etc)
0a45468.jpg but if you unaware of printer repairing, i highly recommend to call a printer tech who ca fix back it quick.

sometime printer acts weired due to this problem while printer or make copies.

Good luck
and rate all answers.

Jun 29, 2008 | Brother HL-2040 Laser Printer

Not finding what you are looking for?
Samsung ML 2010 Laser Printer Logo

952 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers


Level 2 Expert

167 Answers


Level 3 Expert

825 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides