Question about CB Radios

Open Question

GM340 Hi, Im a Cab driver & we use the GM340's but the trouble is Jobs flash on the screen so we cant move away from them. Is there no way it can be linked to our mobiles or some portable device so even when we are away from the car we can receive & accept Jobs. Your info will be highly appreciated. Cheers Ali

Posted by on

  • AnyMHz.com
    AnyMHz.com May 11, 2010

    not without having a nother radio to RX the computer info. and retransmit to antoher terminal node. Or The company could install another terminal node transmitter on another freq. sounds like too much money or too much FCC paper work. but we do stuff like that on ham radio. to RX info.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the mic attachment on my cb radio cause receiving & output problems?


did the radio do well at the cb shop you took it to? when you re-installed it in your vehicle did you change the coax? You may think about taking it to another shop for a second opinion as to whether or not the radio was actually tuned.

Oct 17, 2015 | CB Radios

1 Answer

Can any body help I just bought a cobra 29lxeu multi standard radio is there a problem with the receive on these radios as had this radio hooked up to my homebase antenna on my homebase im...


What you describe is not standard for this radio. It should receive as good as any of the others you have. Are you sure you have all the knobs and switches set right. This radio is more complicated to operate than the previous versions. I personally do not operate one of the new LXs but I do seem to recall they have a RF Gain knob. This should be turned clockwise all the way. Look through the manual. You will be surprised and some of the features the radio has you didn't know about.

Aug 18, 2013 | Cobra CB Radios

3 Answers

What parts are needed for installing a 102" CB


1. swr meter
2. mount. for a car.. make your own.. YOU DON"T NEED A BALL MOUNT... any mount will do.. just make sure it can handle the stress from whipping in the wind and hitting trees.. lol.....just make sure to keep away from body @ least 12" for better swr's.. DO NOT put right up against the body. unless its on top of trunk or roof.. or a tool box. if on a pickup. the stack pocket is a good distant away from the cab to work.. do not put right up agianst the bed near the glass it will give high swr's because of the roof is right there.
3. cables.
4. make sure it has a good ground. clear of any obstructions. like body panels..

Feb 04, 2011 | Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

I have a cobra Bluetooth model # ppr-rbt1 that will not transmit out and only picks up other people if there real close and only every now and then. When I key the mic the needle does not move. What can...


Hi michael, my name is John. Welcome to FixYa. Check your antenna system. Check your SWR they will check it for free at Radio Shack. A good antenna is a magnet mount, you can put it on your trunk or cab, as long as nothing is blocking it. Have any more problems, let me know. Thanks for choosing FixYa....John

Nov 30, 2010 | Cobra CB Radios

1 Answer

I have a 3300hp bought it new in may it has been in the shop every month sence. iv taken it to 6 different cb shops and no one can fix it it will recive well but when i talk on it people can barely...


Hi, my name is John. Welcome to FixYa. Check your antenna, make sure it is grounded good and nothing is blocking it. Have the SWR checked. They will do it for free at Radio Shack or any CB shack. Thanks for choosing FixYa...John

Nov 23, 2010 | Connex 3300 240-Channels Base CB Radio

1 Answer

Radio squeal.


Check it with the external speaker unpluged, turn the mike gain down a little at a time, until it does not squeel. ..hope this helps..

Mar 20, 2010 | Galaxy Radios DX-44V 40-Channels Base CB...

1 Answer

Tuning troubles


I wrote a couple of articles that have all the info you need on a forum.

Here are the links.

How to tune SWR

High SWR causes


Hope this helps.

Nov 22, 2009 | Cobra 29 LTD CB Radio

1 Answer

Cannot recieve or transmitt signal... friend has one and lives about 1-2 miles away from me... we try to communicat but cant find any transmission... please help


Just wondering what type of antenna and Cable are you Using? Also When you press the Microphone do you see the needle on the radio Move? Also if you whistle does the Needle Move? If neither Possibly a bad Microphone. Does your friend Notice a signal when you press the Microphone? If so and no voice is being transmitted again it could be the Mic. Then again it could just be bad Coax Cable. Hope this shed some light.

Jul 05, 2009 | Raytheon VHF 53 CB Radio

1 Answer

Cobra 29 ltd classic side mic


First off I dont believe anyone to peek and tune but anyways. Make sure your mike is for the radio wiring. Next the guy that rigged it up might have gave you all the channels do all your knobs work??? usually you can tall as you get someone to talk with you a few blocks away and start, start turning and flipping switches till you can hear him most likely the guy that did the work on it messed it up. for a filter use a farite choke from radioshack on the mike wire.

Mar 17, 2009 | Cobra 29 LTD CB Radio

Not finding what you are looking for?
CB Radios Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top CB Radios Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

489 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Steve

Level 3 Expert

3287 Answers

Are you a CB Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...