Question about Bernina Bernette Deco 600

1 Answer

Bernina Deco 330: Power outage during the middle of stitching a pattern. Of course the machine shut off, then I turned the switch off and I unplugged it. But what about the incomplete design? It was at the beginning of the third of nine colors ... is there any way to finish the design?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On the design screen, near the center, there are 2 icons which look like a page with an arrow. These advance or back up to the color changes. Once you reach the color change you were stitching, you can advance to the place left off by using the + button on the screen. (If you go too far, use the - to back it up)

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am need a manual for this machine please Bernina Deco 330


A pdf of the manual is available at-
http://www.bernina.com/en-GB/Support-GB/Machines/bernette/bernette-deco

Apr 09, 2016 | Sewing Machines

1 Answer

Is it possible to get a bigger hoop size for the Bernina Bernette Deco 600?


here is a link for part for the machine, if the part you need is not on the link, you'll have to contact bernina website or a bernina dealer Bernina DECO 600 Parts

Mar 13, 2014 | Bernina Bernette Deco 600

1 Answer

Can you upgrade the Bernina Deco 330 to include a USB port


contact bernina customer service about the upgrade

Apr 09, 2012 | Bernina Sewing Machines

1 Answer

Bernina deco 600 keeps running after switching it on


it's possible that something is wrong with the computer
or
there could be a short in the stop button
the machine needs to be serviced

Apr 07, 2012 | Bernina Bernette Deco 600

1 Answer

Bernina Deco 650. won't stitch


You need to take the machine to a Bernina dealer for service. It may just need the timing adjusted, or there could be something else that needs to be done.

Apr 19, 2010 | Bernina Bernette Deco 600

1 Answer

Carriage on deco 330


I had the same problem with my bernina deco 500. Fortunately I could solve the problem, I have posted my solution please read it, it might help.
good luck.
Amany

Jul 04, 2009 | Bernina Bernette Deco 600

1 Answer

I have s Bernina deco 650 embrodiery machine and the stitches won't catch. I had this machine serviced before I moved from SD to an eastern state. It was sewing fine and just started making a noise like it...


Your timing is out in the bobbin area this will have to be reset, maybe the last time that you used it you had a cotton jam, and it was pulled out of alignment.

Aug 07, 2008 | Bernina Bernette Deco 600

1 Answer

Bernina Embroidry Machine - MODEL Deco 330 (not 600) - Hoop arm (that attaches hoop to machine seems to be loose or worn.


are you taking about the part on the machine or the hoop itself? When was the last service? (should be at least once a year)

Jun 21, 2008 | Bernina Bernette Deco 600

1 Answer

Bernina Bernette 600 Deco embroidery machine


It could be that there is a loose piece of thread, or some fluff which is obstructing the tension gauge. Try blowing around the theading area (or even run the hoover pipe near it to see if you can **** it out). I cleared mine by folding a piece of non fluffy material and rubbing gently between the tension dial and machine.

Good luck

May 19, 2008 | Bernina Bernette Deco 600

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bernina Sewing Machines Experts

andika2000

Level 1 Expert

28 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Bernina Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...