ON THE BASE, there is a button that says do not disturb on the lower right hand side on mine and I accidently hit it and turned it on!! I kept trying to fix it with the handset and the menu!! My husband suggested I look at the base and WAHLAH!!! I simply pushed the button and it worked!!!
I'm trilled ...cause I was so frustrated!!! So...there you go!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To mute the ringer, while in standby mode press the volume-down button to select Off.
To mute the microphone, while talking press the MUTE softkey. To put the phone into do-not-disturb mode, press and hold the do not disturb button on the base.
You can download the manual from the manufacturer's web site at http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/TRU8885om.pdf
Do Not Disturb (DND)
DND Allows you to mute the ringer on all handsets.
In the standby mode press the do not disturb button on the base the DND indicator will light and DO NOT DISTURB shows in the handset display.
To cancel press the do not disturb button again.
I had this happen. After searching around here and elsewhere, I decided to look at the base station for the phone instead of the phone itself. In the lower right corner of the base station is a button labeled "Do Not Disturb" in inset print. The red LED above it was lit. I pressed the button and this cleared the problem.
After waiting for over 24 hrs for an answer from FixYa and then they wanted $10.00 and trying to fix it myself, I gave up. Threw all that c$$p into a box, took it back to the store and got my money back. It just wasn't worth the time and aggravation.
My handset does not connect to the base station. It flashes momentarily, but does not find the base. The base station has a humming noise when the phone line is disconnected and the talk button is depressed. Hum is also present when the phone line is reconnected. The problem was resolved by replacing the 9VDC power supply. The hum disappeared and the handset immediately connected to the base.