Question about Frigidaire Washing Machines
Remove fill hoses remove a zillions screws from back remove belt from pulleys remove 2-4 bolts from motor and slide toward front unplug wire harness
Posted on Jun 30, 2008
Tips for a great answer:
Good afternoon friend, that's a great question!
I understand that you are trying to replace the selector knob on your Frigidaire washer, GLTF2940E. Normally this is not a DIY job and we would recommend having a technician come out to the home in order to properly disassemble your front panel and replace the selector knob as needed. Hope this is helpful. -Matt
Jul 29, 2014 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....
Hello - Typically error code 59 indicates that that washer is not detecting a tacho signal for three seconds. Contact a professional to move forward accurately. Technician will need to remove the belt from the motor, spin the motor pulley and diagnose the speed control board.
Nov 29, 2012 | Frigidaire GLTF2940ES Front Load Washer
Nov 03, 2012 | Frigidaire Gallery Supreme Series...
Jun 29, 2012 | Frigidaire Washing Machines
Nov 19, 2010 | Frigidaire GLEH1642DS Front Load Stacked...
May 21, 2010 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....
Mar 09, 2010 | Frigidaire GLTF2940ES Front Load Washer
Sep 23, 2009 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....
Dec 09, 2008 | Frigidaire GLTF2940ES Front Load Washer
Dec 08, 2007 | Frigidaire GLTF1670A Front Load Washer
63 people viewed this question
Usually answered in minutes!