Question about Projection Televisions

1 Answer

Trying to find prgram codes for a universal remote control belonging to charter cable co. The cable box brand is a motorola .the only info on the remote is a serial number inside the battery compartment. The top row reads ur4-expg chd2,ver;4.1 . The bottom row reads m16204040138355. The problem is we just bought a Westinghouse wide screen tv model sk-32h240s and want to use the cable remote to operate it but it wont allow you to control the volume. it forces you to use only the remote to the tv to change the volume. How do we fix this to operate all from the cable romte?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

The user's guide and codes for the UR4-EXPG CHD2 is at:

http://www.charter.com/Visitors/GETBINARY.xbin?ID=1623.

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost remote to 2005 screen tv jvc model # HD 61Z456. How can i program channels without remote ?


If there is no 'menu' button on TVs' control panel, you should have its remote control to make an auto-tune function. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchased a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ If you see these sites by "MOSAIC" or "Magazine" view will make surf easier. Or type in the brand name of your device in the search box, and press "Enter".
Universal remote controls are available at most of the electronic spare part selling shops.

Jun 14, 2014 | Projection Televisions

1 Answer

Code for sharper image jumbo tv remote to operate a motorola brand cable box. remote instructions dosn't list it and code search is not successful.


If you go to a website called www.mscustomercare.com. Scroll down to the bottom of the page click on The Sharper Image Universal Jumbo Remote then click download. The manual has the instructions and codes. Good Luck. Source(s): http://mscustomercare.com/

Jan 30, 2010 | Projection Televisions

1 Answer

Through Amazon a Brookstone's "Jumbo Universal Remote" was delivered - there is no identification of who manufactures this remote. We need to have it control an AT&T-California cable box which was...


I happen to be a Jumbo Universal remote Expert here at Fixya, so I hope I can help. It is possible that this remote just won't run your Motorola cable box, but I wouldn't give up until I had tried the codes from the list in the manual, as well as run through the auto-setup feature of the remote for CBL and for SAT, where it just tries all the cable box codes one at a time.

I was able to find a working motorola codes for an Innovage Jumbo Remote, a three digit code remote you might as well try: 051.

You have probably tried the codes for Motorola (031) and GI (000, 032) from the manual using these steps:

1. Turn on the device with which you want to use the remote control.
2. Locate a 3-digit code for your device. (000, 031 & 032 for example)
3. Press and hold the corresponding button on the remote control
(CBL) for approximately three seconds. The POWER INDICATOR illuminates.
4. Enter the 3-digit code for your device within 30 seconds. The POWER INDICATOR shuts off.
5. Press the ON /OFF button to verify correct code entry. If the device shuts off, the code was entered correctly. If the device does not shut off, repeat steps 3-4, using a different code located on the Code List.

If those are still a bust, try the GI SAT codes 018 & 019.

Have you tried the following steps with both CBL and then SAT to search it's database?

1. Turn on the device with which you want to use the remote control.
2. Press and hold the corresponding button on the remote control
(SAT or CBL) until the POWER INDICATOR on the remote control illuminates. The remote control is in programming mode.
3. Press and release ON /OFF. The POWER INDICATOR on the remote control flashes once and stays on indicating the unit is in Power Scan mode.
4. Press CHANNEL UP or CHANNEL DOWN repeatedly until the device turns off.
5. When the device turns off, press any key to store the code.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

I hope that helps.

Oct 26, 2009 | Projection Televisions

1 Answer

Lost remote for sanyo ht30746 tv


You can buy an exact remote from a company called Remote control warehouse for 39.95----Google the model number and you will find them.

It is very common that "universal" remotes will do many functions but not ALL that the original remote did--considering this it may be a good idea to get an original remote---part number on this site is: 6450750977for the remote for this model Sanyo.

I hope this helps you and if you have any questions let me know.

SD TECH

Oct 04, 2009 | Projection Televisions

1 Answer

I have a universal remote and need the code for a Sony Videoscope XBR projection tv


I don't know if all codes are the same. Comcast Cable gave me a list of codes for their universal remote for their motorola cable boxes. For Sony tvs it says either 0000 or 0111. I still use all 7 of my remotes. Universals are basically only good for power and volume. I need the other remotes handy to enjoy the other functions of my system! Anyway, hope this works 4-u and that you get better use out of it than me.

Sep 01, 2009 | Sony KP-51HW40 51" Rear Projection...

1 Answer

I need a remote code for a rca remote for the olevia remote control can you help


Unfortunately Olevia is one of those t.v. brands that is not compatible with many universal remote controls. They make a Universal Learning Remote specifically available from Olevia on their web site that may solve your problem if your universal remote control turns out not to be compatible with your Olevia television.

As for what codes you can try, there are many, and the codes depend on your universal remote control brand. Many times, an RCA code will work for Olevia televisions, so you should try the RCA codes that come with your universal remote first, before trying any of these other codes.

If you have a Dish Network Universal Remote you can use code 506 or 127.

Direct TV remote codes vary by model number on the remote control, but the following codes work with most Direct TV remotes: 506, 127, 11144, 11240, 11331, 11610

Cable Vision use code 506

Charter and Movie Box remotes you can use 1144 or 1178

Comcast codes are 11144, 11240, 11331, 21075, 10159, 10154, and 10088

Cox code is 1610

Brighthouse remote codes are 1610, 1144, 1240, and 1331

Time Warner remote codes are 1610, 1144, 1240, 1331, 432, and 1610

If none of these brands are what you are looking for as far as your Universal Remote Control is concerned, many universal remote controls will work with Olevia televisions if you use the codes found under the RCA, LG, Phillips, and Yamaha in the code listing included with your remote control.

Jul 25, 2009 | Projection Televisions

5 Answers

I am trying to find a universal remote code to control the new Zenith digital tv tuner converter box. The model # is DTT900. It is for a person with low vision who cannot see the buttons on the remote...


Hi,

Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Oct 23, 2008 | Projection Televisions

4 Answers

I need an ilo code for my charter remote so I can program my tv channels


Need to know the model of your charter remote. TV is ILO? OK, we are half way there..

Sep 09, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

1,613 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...