Question about Samsung HCN4226W 42" Rear Projection HDTV-Ready Television

1 Answer

Sound went out

My sound started to out intermittently. It would work if I completely unplugged the TV, waited a few minutes then plugged it back in and powered it up. I now does have any sound at all. Would this be the amplifier or the speakers themselves. I am fairly technical would like to attempt repairing myself. Please advise. Thanks.

Posted by on

  • mannu23456 Aug 12, 2008

    Picture is allright in my Samsung 21" tv but sound is not coming at all.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please help ! I moved my Samsung hcn4226w and reconnected. The picture is fine but, no sound now and cannot use all functions on the remote. Any suggestions would be great. Thanks.

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv comes on, picture is fine but there is no sound


Try power off. Disconnect everything...plug back your source (direct tv or cable) Wait ten minutes and see if the board will reset when you plug in and start again. Intermittent faults like this suggest a weakening/ aging of the board components.

Mar 20, 2014 | Mitsubishi WD-65735 Television

1 Answer

My panasonic rear projection TV turns off


this just happened to us, we tried the reset button, didn't work. we unplugged from surge protector and plugged the tv in the regular wall socket and after a few minutes the green light quit and we were able to turn tv on

Apr 08, 2010 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

My Samsung hcn4226w won't stay on.


There are many protective circuits inside the set that will shut it down if a problem is detected. It sounds like there are intermittant detections of problems and the "restart" temporarily clears the problem. If the unit is no longer under warranty, open up the back with the set unplugged and try reseating all of the boards and connectors. The trip may have jared a few things loose. Update this with the results.

Thanks,
Dan

Aug 20, 2009 | Samsung HCN4226W 42" Rear Projection...

1 Answer

No Picture, but I have sound!


Your color tube has probably went out that is why you have sound but no picture, you will have to call a tv repair place or where you bought it from to get an estimate on having it repaired

Jul 22, 2009 | Projection Televisions

1 Answer

I have a Samsung HLR6168W DLP that intermittently shuts itself down,the sound stops, the picture disappears, the screen goes dark but not completely off. A few moments later the picture returns, but no...


its the problem of inner lamp that is near to end of its life and it needs replacement.and what the thing is happening is the indication of faulty lamp.
how to replace the colour wheel with diagram and procedure
http://www.jangro.com/a/2006/07/24/samsung-dlp-replace-color-wheel/

how to replace the lamp in 5 minutes with diagram and procedure
http://www.jangro.com/a/2006/08/03/how-to-change-your-samsung-dlp-lamp-in-5-minutes

 
how to replace the ballast with diagram and procedure
http://www.consumermeet.com/entry/samsung-dlp-ballast.html

Mar 11, 2009 | Samsung HL-R6168W 61" HDTV

1 Answer

RCA 52 INCH D52W20B WON'T COME ON


A 1995 60 inch rca good picture and sound. Then it started a cracking noise and a hissing sound, then the picture went blurry. then it was nice picture and sound, then it died. took the back off and turned out the lights. Plugged the tv in and out from the wall socket and there was a sparking noise and a small arc when i plugged it in and out a few times ,at the part that the power plug plugs into.The white part that is beside the white power plug part has thick red wire coming out of it and goes into another plug that has more red wires in it. but the big white part beside the power plug part looks burnt and has black powder on it. that part is probably the problem but maybe not, what it the name of that part and how much would it cost and is it plugged in or soldered.

Oct 18, 2008 | RCA P52937 52" Rear Projection Television

2 Answers

No picture, sound, or response from button on a Samsung DLP TV


Same Same Here - SAMSUNG SUCKS!!! One day we lazy Americans will learn not to outsource so much and get back to good ole American Made.

May 28, 2008 | Projection Televisions

2 Answers

Picture gone


Is the set completly dead...does the green light flash then go off. or when you plug it up does it come on for a moment?

Jan 02, 2008 | RCA HD52W56 52" Rear Projection HDTV

4 Answers

TV Picture Goes Black


I had the same exact problem.
I removed the bulb and cleaned it. There is a small screen at the top of the bulb and it was covered with dust. Once it was cleaned I replaced the bulb and it solved the problem.
Thanks to those who posted the solutions

Jul 28, 2007 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Power light flashing/ no picture


I have the same problem. The only way to get the TV to come on is to unplug it, but once you get it back on it turns itself off again in a few minutes.

Jul 11, 2007 | Toshiba 56H80 56" Rear Projection...

Not finding what you are looking for?
Samsung HCN4226W 42" Rear Projection HDTV-Ready Television Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...