Question about Philips Magnavox 9P6034C 60" Rear Projection Television

1 Answer

55" Projection TV

Watching my 55" projection TV all of a sudden the screen went blank and the sound stopped. I'm wondering if anyone can tell me the problem and what I can do to repair it. Model # 9P5534C102.
Thank you.

Posted by on

  • anderson2230 Jul 08, 2008

    I purchased the chip kit for the model 9P5534C102, but it did not solve the problem. The TV still did not come on. I appreciate the suggestion. Are there any other suggestions? What is the cost of the complete circuit board?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers

Check www.magnavoxhelp.com. They have a chip kit that may fix this problem.

Posted on Jul 01, 2008

  • Edward
    Edward Jul 08, 2008

    I would check your solder connections again. Also make sure the chip was not put in backwards.  The chips typicaly fixes the problem. You can ship me your old chip and I will test it in my TV.  
    I put a dip socket in my set so that I could pop chips in and out to test them. If your chip works in my TV then we will know for sure that it was not the opto IC chip. Dumb question: Did you check the fuse inside the set? 

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Akai rear projection tv suddenly stopped working.


This set with Akai is actually made by Samsung (they own and use the Akai name).

If lamp light etc and you have heard a cracking sound it may be the color wheel.

You can remove the lamp and look where it faces--look and the wheel can be seen----is it shattered or missing plastic pieces?

The wheel commonly fails in this fashion and is turning at over 12,000 rpm. The set will detect if the wheel is stopped or moving too slow and just what you describe will happen.

Wheel is widely available and You Tube has video instructions for replacing them by model number.

Questions?


3_29_2012_2_46_37_pm.jpg

Mar 28, 2012 | Akai PT5492S 54" Rear Projection...

1 Answer

My screen went blank but the sound works fine. We were watching TV when the screen went out. The sound stayed on. We still get sound but no picture. Is this worth fixing? If so what is the best way to go...


all in one day my screen started by showing a u look at top and bottom. all three colors kind of separated from each other and therefore made shadows on all the writing and double and triple vision on people and images. then it drawed in from sides and showed some black. then it popped in the back and no picture. the sound then came back on with no picture. so i shut it off and unplugged it. what do i have to get to fix this? thank you, Robert Hopkins

Jan 01, 2011 | Akai PT5598HD 55" Rear Projection...

1 Answer

Picture went blank. Still have sound. What is wrong?


When was the last time,this tv the projection lamp was replaced?The projection lamp in the tv now,has not been replaced the last 1 1/2 or 2 years.The tv been on and watches 4 or 5 hours a day.The projection lamp life span is over.Require a new projection lamp.

Aug 11, 2010 | Philips 55PW9363 55" Rear Projection...

1 Answer

No picture do have sound


i think you have a blown tube.if theres no pic but sound youve got a blown tube

Nov 03, 2008 | Akai PT5598HD 55" Rear Projection...

1 Answer

Color out of convergence.


Good Day;

Sounds like the CONVERGENCE IC has failed >STK-110 > 267P155010. TV only Uses one.
Good Luck, big IRISH.

Aug 31, 2008 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Screen zipped down to dot of light in center and went blank. No audio either


the deflection circuit shut down and i hope it didn't burn the crt's .

Oct 29, 2006 | Toshiba 55H70 55" Rear Projection...

1 Answer

Won't turn off unless unplugged


Ther eis a stand by function on the Television. If you have the owners manual read about that function. Th ered light stays on because it is programed to come on a t a certain time. Go to menu and find the stand by function.

Aug 17, 2006 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
Philips Magnavox 9P6034C 60" Rear Projection Television Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...