I have a UMC 15" LCD TV which the remote control has broken on. we've bought a Technika tt-707 universal remote control but cannot find a code for it to work on - any ideas on the correct code?

0291,0290,0299,0296. Try these codes. If you wish to get more, check the sites linked here. It has setup codes, and setup procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

0031 0004 0005 0009 0051 0053 0105 0109 0170 0000 0174 0001 0008 0012 0042 0058

how to retune my technika digital tv without the remote

Hello
If your Technica TV asks for a four digit universal code; buy onw RCA RCR311B model remote control. The codes for Technica with this remote control are:
1004, 1006, 1009, 1010, 1013, 1025, 1035, 1045, 1051, 1060, 1061, 1075, 1078, 1103, 1122, 1123, 1205
If it asks for a five digit code, buy RCA RCR 312W model remote control
Codes for Technica with this remote control are:
10054, 10180, 10150, 10060, 10092, 10016, 10056
Otherwise, give me the Brand Name and Model Number of the remote control you have with you now, and let me search whether there is any code for Technica TV, with this remote control. OK.

Hello
Three digit universal remote codes for Technica TV are:
000/ 001/ 004/ 005/ 008/ 009/ 013/ 042/ 046/ 053/ 058/ 076/ 105/ 109/ 170/ 174
Four digit codes are:
0031 0004 0005 0009 0051 0053 0105 0109 0170 0000 0174 0001 0008 0012 0042 0058
OK.

Visit www.skymediauk.co.uk all of the universal codes are listed there.

Auto code search

1. switch on the TV and select a channel eg. Bbc1 on the TV itself
2. press the appropriate device button eg. TV
3. press the green SET button for approx 5 seconds until the red light comes on.
4. release the green SET button and point the remote at the device to be controlled, the remote will emit a test signal about every 2 seconds.
5. when the TV switches itself off briefly press the green SET button to store the code found.
6. when the red light goes out the search is ended.
7. try out the remote if it works follow the same steps to set it to other devices eg. DVD. If it does not work follow the steps again.
cover other remote sensors on other devices when setting the remote.

One for All codes are listed on www.skymediauk.co.uk If the code listed there does not work, it is becuase the Remote control was manufactured before the Universal Code was supplied to UMC by One for All.

Look at the web site www.skymediauk.co.uk where they list all of the universal codes for One for All (which should be the same as most Universal Remotes) If the code listed there does not work, contact the manufacturer of your Universal Remote to ask if there is a way to upgrade the Remote to include the latest codes. Tell them the code you have been given by UMC and has been tested to work in the new One for All remotes. If still no joy, get a universal remote with Learning Function.

I have searched for this information for over a year. This manufacturer does not gice a manual to it\'s products. It doesn\'t even have a website!
But today I\'ve found the manual so here it is for you to share.
Here is direct link.

I won\'t buy this **** no more.
I hope this helps.