K7SOM+ jumpers - EliteGroup K7SOM (K7SOM W/CPU) Motherboard

http://www.motherboard.cz/driver/scsi.htm

http://www.motherboard.cz/driver/usb.htm

http://www.motherboard.cz/netcard/

http://www.motherboard.cz/reklama.htm

hope this helps

click this link for your motherboard driver

There are more than one version of this motherboard. The following link will take you to a listing of all the K7SOM+ versions (plus other older motherboards from EliteGroup).

http://www.ecs.com.tw/ECSWebSite/Product/ProductArchive.aspx?CategoryID=1&MenuID=24&LanID=0#Archives

the site below should be able to help with what cpu processor you can use
http://www.motherboard.cz/mb/ecs/K7SOM.htm

Provided below is a list of all supported CPUs for you're motherboard from ECS; http://www.ecsusa.com/ECSWebSite/Support/CPU_Support_Model.aspx?detailid=316&MenuID=69&LanID=0
The highest CPU is:
AMD Athlon XP 2600+ (.13u) (256K,266,Socket 462)

Cheers'
Mike

Look at the sticks of RAM -- "high" density means fewer chips on each side of the stick, i.e., newer technology and production methods have packed more bits into each chip, while "low" density usually means 8 chips/side, using older RAM chips.

Older motherboards do not expect to find "high" density RAM, and typically will only detect 1/4 or 1/2 of the RAM on the stick.

If you buy a new motherboard, it will support BOTH densities.

Each memory slot can hold DDR PC2700 or DDR PC3200 with a maximum of 1GB per slot.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

go to start and run. In the command box type

diskmgmt.msc

Click Ok

In the Managament Console you should see your disk. You may need to format
it, or assign it a drive letter.
OR

UPDATE YOUR WINDOWS XP TO XP3

not wory windows(xp) will have the drivers in it bank