Question about Wurlitzer Jukebox 1015 One More Time 100-Disc CD Changer

1 Answer

Cd not playing

Display shows 0, cd gets picked up by arm sets it in the player, then rejects and does the same thing continueously, thanks gene

Posted by on

  • texasheather Aug 18, 2008

    I have the same problem but my display is showing a 1 and moving the arm back and forth continuously. I have a OMT 50 disc.

  • pjb8 Aug 29, 2008

    I have the same problem; went through trouble shooting mode 9 guide and when I checked mode 95 the turntable motor would not run. All other mode 9 checks seem to be ok. I suspect that I may have a bad CDM12. Any other suggestions?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Wurlitzer Expert
  • 211 Answers

If you look at the far side of the gripper arm towards the back of the machine, at the base, you will see a white bracket like a duck's bill. This has come loose or broken. You can prove this is the problem by pressing down on it and clicking the microswitch as the gripper reaches back over the carousel.

Posted on Oct 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony CDP -CX200 Arm comes forward to pick up cd but goes back empty. It will not load the disc to play.


Is the second part of the arm clamping the cd? If not then the arm is probably broken and needs to be replaced.

Dec 28, 2012 | Sony CDP-CX70ES CD Player

1 Answer

U70 error message on cd player


U70 error message on cd player - Fixya

www.fixya.com/support/t12308553-u70_error_message_cd_player
Apr 5, 2012 - U70 error message on cd player Cd player doesn't work at all. Displays 0 track, 0:00 (min,sec). The play - Technics CD Players question.

Technics error code f 70 CD Players Questions & Answers ...

www.fixya.com > Forum > Tags > error code f 70 > CD Players
Technics cd players error code f 70 related questions and answers. ... won't play cds changer turns on ok, reads error message I have the same problem.

Apr 05, 2012 | Technics CD Players

1 Answer

My 1015 will selects the same disc, then places it on the turntable. Turntable does not spin. The arm the picks the cd and places it back into it's slot. This happens continuously and the digital display...


There is most likely a problem with your K7 switch acuator. I have these in stock, and can help verify this with you over the phone. Please email me and I'll give you my phone number, tech@wurlitzer-ohio.com

Mar 06, 2011 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

Spin both directions theb display show table error


Usually CD rotates in the clockwise direction. Whenever you are using CD which your CD player cannot detect then CD is rejected and suddenly CD rotates in anticlockwise direction.
Also, If your player is older and your CD players laser head worn out then CD's which were played good previously cannot be played properly and then stop in middle, when this happens you can see CD rotating in anti direction.

Clean the laser head, with CD cleaner and do not use scratched CD's

Aug 26, 2010 | Sony CDP-CX300 CD Player

1 Answer

Changer will pick up CD and spin for about three seconds stop, set still for about four seconds. CD will not spin again reject CD back into the rack. the above will happen again but during the four second...


This sounds like an issue with either your CD player, CD control board, or Selection and Credit Computer. I can help you troubleshoot further over the phone (and repair/replace whatever is necessary). My name is Rod and I can be reached at tech@wurlitzer-ohio.com. Please email me and I'll email you my telephone number.

Jun 18, 2010 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

TASCAM CD-01U err code


Get a pick up.. Look on line for a pick up for the unit. This is a common problem for these units

Jul 08, 2009 | Tascam CD-01U CD Player

1 Answer

Cd crashes


The arm is sprung. It is catching on something so the motor is driving , tightening the spring, then it lets go and slams the arm over.

May 12, 2009 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

The SA-1 cannot read CD and Display is off


Hi,

lens is dirty ........clean the lens using the lens disk cleaner...........still problem continues the laser head is not picking up the disc...........need to replace laser assembly.......

Feb 04, 2009 | Marantz SA-1 CD Player

1 Answer

Titan cd420 cd player will not play continuously


Press play, then repeat twice. Display should now show "repeat" "all"

If it is not working, try another cd with fewer tracks on it.

Jan 15, 2009 | CD Players

Not finding what you are looking for?
Wurlitzer Jukebox 1015 One More Time 100-Disc CD Changer Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wurlitzer CD Players Experts

Dave Jukebox

Level 2 Expert

211 Answers

phil

Level 2 Expert

567 Answers

mixhali

Level 1 Expert

2 Answers

Are you a Wurlitzer CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...