Pixma mx330 printing very faded colors - Canon PIXMA MX330 Multifunction InkJet Color Printer

Which error the printer shows?
The Cartridge is Not Recognized? or other ones? Tell me the Error code that the printer shows and i'll help you

ADCSFXworks Printing Center <3

I have a canon mx330 fax print and scan all in one printer
To scan without ink just hold the back button in after the ink message comes up it should eventually take you to the main menu then you can hit the scan button.

Hi as you have cleaned the heads the next step is to replace the print heads or some people claim that cleaning the heads with some expensive liquid works I have not had any luck with this.
so I would suggest you look up Canon PIXMA MX330 print head, on Amazon at about £47. so not cheep but very simple to fit
good luck
Ian

Welcome to FixYa!

No, the Canon MX330 is not WIFI compatible.
It has a feature of Bluetooth, PictBridge and Flashdrive Direct Printing though.

Thanks for using FixYa.
Jas247

in the video link below there will be the answer at 7:28 in the video, fastforward to your spot and pause for your paste...

http://www.youtube.com/watch?v=x7yY8Y54z3A

Goodluck..

Mx330 MX340 All MX300 series are pretty much the same...

unfortunatly not!The m/c will print each and every fax!I can suggest getting a fax to email nr and recieve the faxes on your pc and then printing what u need!Memory does keep about 258 pages depending on the coverage on the pages!

clean the head of your printers cartriage from both side

then try

ok bye

They are not in the middle as shown in the manual. I still can't find them. God! this printer is only that big and I spent three days looking at every possible corners and gaps and still can't see where the ink cartridges are. Will not buy this Canon printer again.

Check that the printer shown in the print window is the MX330. It sounds like your default printer is set to be a virtual printer such as Microsoft XPS or Acrobat PDF. You need to set the MX330 as your default printer by going to your Printers and Faxes window, right-click on the MX330 printer and select "set as default" on the list there.