Question about Toshiba 62HMX84 62" Rear Projection HDTV

1 Answer

HDMI Cables not working

Thanks for the help,
I have changed the settings to HDMI and I can get sound but the picture does not come up.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 129 Answers

MOST OF THE TIME ITS BECAUSE THE DVD COMPONENT THAT YOU ARE USING IS NOT SET FOR 1080I CHECK THAT FIRST
GO TO THE DVD MENU AND SET TO THE PROPER SETTING
YOUR RATING TO MY ANSWER IS HIGHLY APPRECIATE

Posted on Jun 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am unable to get a picture on hdmi when i connect my ps3, but am able to get sound when i use ps3 controller. any ideas ?


Steps
  1. Step 1 Check for an HDMI port Check the back of your television for an HDMI port and refer to your owner's manual for your television's resolution. A resolution of 1080p offers the highest quality.
  2. Most PS3 systems support 1.3 HDMI, but older systems may need a software update from the 1.1 or 1.2 version.
  3. Step 2 Disconnect cables Disconnect all the cables and adapters from the back of your PS3, and then unplug your TV to reduce the risk of shock as you work.
  4. Step 3 Connect HDMI cable Connect the HDMI cable. Reconnect the power cables on both the TV and the PS3 system.
  5. Step 4 Hold power button Hold down the power button until the PS3 beeps and continue holding it for an additional five seconds until the system makes a second beep.
  6. The Playstation 3 should detect the high definition cable and automatically adjust the settings to give you the best picture and sound possible.
  7. Step 5 Test the connection Test the connection. If the HDMI cable isn't working, turn everything off and reconnect the original cables to manually change the settings.
  8. Step 6 Adjust the settings Turn the system back on, select Settings, Display Settings, Video Output Settings, and then HDMI. Repeat the process for your Audio Settings. You can now experience your games with the highest video and audio quality available.

Dec 01, 2014 | Sony KDF-E50A12U 50" LCD HDTV

2 Answers

I hooked up my HDTV with a HDMI cable but when I used the Audio L/R cables, I can't get any sound. I can get sound if I hook up the TV with regular cables but then I don't get the HDTV picture. Any...


You may have to go into the TV setup menu and change a setting for Sound (or Audio) that tells the TV which input to use (HDMI or component) for sound. Usually the HDMI connection will work automatically but if you connect cables to Audio L/R that may override the HDMI sound input.

Dec 07, 2009 | Televison & Video

2 Answers

No picture or sound


Your display needs to be reset, Turn the ps3 off. Then turn the ps3 back on but continue to press the power button until you hear the beeps then it should work fine :)

Aug 05, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

HDMI Port


you will have to look at the manual, but sometimes Audio isn't transmitted on HDMI cable,( I know it makes no sense). sometimes you will have to also use the digital optical audio cable, or SPDIF coax didital cable. I had to use the Di

As for your PS3 I had simillar issue, the PS3 doesn't Automattically adjust from analog, to component, to HDMI. If you get a signal thru the Reg RCA plugs, if you plug in the HDMI cable at the same time, then go to the system settings and change the type of plug you want to use, choose the HDMI, and the screen should flicker then show the signal from the HDMI, then just power off and/or unplug the analog cables, and you are using HDMI. hope this helps, if so thanks for the ratings

Mar 31, 2009 | iLO 3200 32 in. LCD Television

1 Answer

JVC LT-Z37SX5 no sound when using hdmi connection to HD box


the tv has a configaration that conveys the sets focus on both audio and video performance. full hd resolution of 1920-1080 pixels.
hdmi inputs allow connection of the generation of 1080p sources for the systems which offer 1080p outputs

Jan 12, 2009 | JVC AV-36D303 36" TV

1 Answer

Hdmi connector causes picture freeze


Hello,

The problems with HDMI are plentiful. They are still hashing out the standards for it, and every company seems to be doing their own thing. The compatibility issues are never ending, and you may be a victim.

It sounds like the Blu-Ray and the TV are having compatibility issues. You can try changing resolution settings inside the Blu-Ray to see if it helps. If not, you might be stuck using Component cables. LG televisions are not the most well-constructed or designed tv's in the world, so if the optical output is not working, your Digital Board might have an issue, as well. Any competent TV repair shop should be able to assist you in troubleshooting and repair, if necessary.

I hope this helps you.

Dec 29, 2008 | Televison & Video

3 Answers

Ps3 gets sound but no picture when using hdmi cord


you need an optical lead for the sound and hdmi for the picture

Dec 29, 2008 | Philips 23PF4321 23 in. HD-Ready LCD...

7 Answers

No sound through ps3 hdmi


hi i had a problem, but had no pic, but did have sound, rang sony, and they said buy a new hd cable, went out and bought one, and it worked fine!!!

Jan 08, 2008 | LG 42LC2D 42 in. LCD HDTV

2 Answers

No picture, but sound


I had the same problem and I managed to solve it. It was because the HDMI was set to 1080i and my TV isn't HD. Default HDMI is 480p. You can check your current HDMI setting on the front panel of your DVD. There should be a button with the words "HDMI select". Next to it there should be 3 values. If the current one (a green light shows which one is selected) is not 480p, change it. To change it, make sure your sd-5000 is on, but not reading a DVD. The press the "HDMI select" button on the front panel until the selected one is 480p. This worked for me.

(I had the same same problem without the reading slowly part. On one TV, the sound and video weren't working, and only the video wasn't working on another TV)

Hope it helps.

Dec 28, 2007 | Toshiba SD-5000

1 Answer

Picture goes to a lime green fuzz and then no piture or sound!


which AV connection are you using? HDMI or the cable supplied with the PS3, If using HDMI, you have to set the PS3 visual settings to HDMI, to do this, use the cable supplied with the PS3, and have the HDMI cable plugged in. Then while using the cables supplied with the PS3, switch the settings over to HDMI, then change the TV's input selector to your HDMI and confirm the settings changes. Hope it helps take care

Oct 17, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Toshiba 62HMX84 62" Rear Projection HDTV Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...