Put a new ink cartridge in the printer a MFC-495CW and it does not print printed fine before replacing the cartridge and color also prints have tried 3 different ones

Please notice that you will destroy the C/Y/M part of the print head because the ph needs the ink to prevent a dryout!!!

Simply stick some adhesive tape around the window in the middle between the ink-outlet and the valve. The flag inside signals the printer the ink level.Still having Problem Then follow Us For

Brother Printer Support

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfc495cw_all

install fullfeature software

The following may work: remove all the ink supplies. Remove the printhead and soak it for about 5 minutes in 0.5" of very hot water. Gently blot the printhead on a soft damp paper towel to remove the excess water, then replace in the printer and then reinstall the ink supplies.

Check out if you've installed it correctly. Also check out other ink cartridges, are they empty? If yes you won't be able to print anything. However, if all ink cartridges are OK then try to reset the printer or reinstall the drivers. You can find help in MFC 495cw users manual

I assume that you inserted an new OEM black cartridge. If you are using aftermarket of refilled cartidges, change to an OEM cartridge.
- Press on the printer
- Press of and select
- Press of to choose , or
- Press
- The machine cleans the printerhead and goes back to the Ready screen when finished.
If you clean the head 5 times and things don't improve, the printer should be serviced at a printer service center.
If you are using aftermarket or refilled cartridges the ink is typically not up to manufacter specifications and can gum up the printheads.

This is due to the ink...Check you ink cartridges if they are still full of if the ink has dried out thats wht printing is not working

Try running a few cleanings on the color.

Press the ink button and select cleaning,, do about five cleanings. Print the ink quality test page (from the ink button as well) and see the quality if it improved.

If it still doesnt print its possible the ink is clogged and may need servicing to replace the printer head

Try remove all cartridges then put back it one by one.Make sure the color cartridges are not empty too.The printer need all cartridges not empty to initialized and working.

All brother machine have a one year in parts and labor this machine have a print head problem.

i cannot print anything