Question about Epson Stylus Photo RX700 All-In-One InkJet Printer

Open Question

Waste ink pads are saturated epson r360 - Epson Stylus Photo RX700 All-In-One InkJet Printer

Posted by on

  • caver485-inf Dec 26, 2008

    Error message says the printer needs a service but I want to empty the waste inkpads first - how?

×

3 Suggested Answers

  • 2 Answers

SOURCE: EPSON R360 ERROR MESSAGE.

i will kill you understood do not ask again mothers abuse

Posted on Jun 03, 2008

loumsc
  • 114 Answers

SOURCE: EPSON r360

Are you sure it is staurated or it just the printer showing the error. Apparently there is a usage timer in the printer firmware that will display this error after so many hours of usage. Epson has a small program to reset this error but warns that if the pad is saturated it may leak out onto you table/desk. My R220 displayed this error and I reset it with Epsons resetter program. If you are not sure of the pad, I would put something under the printer just in case it is saturated and leaks. I don't think you can buy replacement pads from Epson as they say the printer is disposable. I also don't know what material the pads are made of but I have never seen one overflo in all the years I have used Epson printers. There is always a first time so if I were resetting mine I would defininately put something under the printer to watch for leaking ink. The program to reset the ink counter is EpsonIPRUtility.A10.exe and is available at www.Epson.com

Lou

Posted on Aug 23, 2008

tigertail
  • 163 Answers

SOURCE: waste ink pad saturated. EPSON STYLUS PHOTO R360

Replacing the pads is costly, messy and requires the printer to be taken completely apart. If you have little or no experience of stripping down printers it is best left to a proffessional. Contact Epson to find your nearest service centre, but remember to get a quote as it may be more economical to replace the printer. Sometimes the counter can "jump" to the end of life number, this especially happens where 3rd party or refilled inks have been used. If you believe this to be the case and there is no sign of ink leakage and the pads look fairly clean then you can just reset the counter using special software called the SSC utility. See these sites:
http://www.ssclg.com/epsone.shtml
http://inkjetprinterhelp.us/epsonSSC.html
More information about this issue and the "official" Epson resetter is available from the Epson web site, please read this link:
http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

Please take a moment to rate this solution. Thanks.

Posted on Apr 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EPSON R545 waste ink saturated


You need to reset your printer. Goolgle search for "indoreset for rx595" and download it. That is the program you need to use to reset the waste ink pad counter back to zero.

Jul 20, 2010 | Epson Printers & Copiers

1 Answer

Waste ink pad in the printer is saturated


waste ink pad in the prenter epson DX9400F

Dec 11, 2009 | Epson Printers & Copiers

1 Answer

I have a warning that my ink pad is saturated and needs replacing contack dealer for assistance (help)


Ink means pad for waste ink nearly full. Epson program read and count all waste ink from head cleaning and ink charge. Next, you need reset waste ink counter, and replace or washing pad. You can extend outlet pipe to outside of printer, so next time you don't need replace pad again.

Jun 27, 2009 | Epson Printer

1 Answer

Ny epsom r360 reads ink pads saturated


don't replace the ink pads install a external waste ink tank instead, then reset the printer using reset program . . search on eBay for epson waste ink tank it incudes the reset program.

Jun 07, 2009 | Epson Stylus Photo R320 InkJet Printer

1 Answer

Waste ink pad saturated. EPSON STYLUS PHOTO R360


Replacing the pads is costly, messy and requires the printer to be taken completely apart. If you have little or no experience of stripping down printers it is best left to a proffessional. Contact Epson to find your nearest service centre, but remember to get a quote as it may be more economical to replace the printer. Sometimes the counter can "jump" to the end of life number, this especially happens where 3rd party or refilled inks have been used. If you believe this to be the case and there is no sign of ink leakage and the pads look fairly clean then you can just reset the counter using special software called the SSC utility. See these sites:
http://www.ssclg.com/epsone.shtml
http://inkjetprinterhelp.us/epsonSSC.html
More information about this issue and the "official" Epson resetter is available from the Epson web site, please read this link:
http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

Please take a moment to rate this solution. Thanks.

Apr 14, 2009 | Epson Printers & Copiers

1 Answer

EPSON r360


Are you sure it is staurated or it just the printer showing the error. Apparently there is a usage timer in the printer firmware that will display this error after so many hours of usage. Epson has a small program to reset this error but warns that if the pad is saturated it may leak out onto you table/desk. My R220 displayed this error and I reset it with Epsons resetter program. If you are not sure of the pad, I would put something under the printer just in case it is saturated and leaks. I don't think you can buy replacement pads from Epson as they say the printer is disposable. I also don't know what material the pads are made of but I have never seen one overflo in all the years I have used Epson printers. There is always a first time so if I were resetting mine I would defininately put something under the printer to watch for leaking ink. The program to reset the ink counter is EpsonIPRUtility.A10.exe and is available at www.Epson.com

Lou

Aug 23, 2008 | Epson PictureMate (C11C556001) InkJet...

1 Answer

Epson stylus 830Uink pads full not printing help


The Waste Ink Pads in your printer are saturated with ink and the waste ink counter has exceeded its limit. The Waste Ink Pads should be replaced as soon as possible. You can overcome this problem temporarily by using the SSC utility - download from

http://www.ssclg.com/epsone.shtml

and reset the Protection Counter. This will stop the lights flashing and restore normal operation. However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens. This requires the disassembly of the printer. Should you decide to have a go at changing the waste ink pads, the 830 service manual can be downloaded from here:

http://www.mediafire.com/?m6ouftizois

Jul 13, 2008 | Epson Stylus Photo 820 InkJet Printer

1 Answer

EPSON R360 ERROR MESSAGE.


i will kill you understood do not ask again mothers abuse

Jun 03, 2008 | Epson Stylus Photo R300 InkJet Printer

2 Answers

EPSON 360


download a ink pad reset utility at epson.com/ipr or there are some other 3rd party s/w for ink pad reset

Feb 19, 2008 | Epson RX620 All-In-One InkJet Photo...

Not finding what you are looking for?
Epson Stylus Photo RX700 All-In-One InkJet Printer Logo

Related Topics:

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...