Question about JVC KD-SHX701 CD Player

1 Answer

When power first comes on it works for about 5 seconds but with no display then all displays lights go off but when you push to eject on the cd the light come on but not the display can anyone help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

LOOK FOR YOUR RESET BUTTON

Posted on Jun 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a jvc am/fm cd player kds-30 it has no eject button anywhere and i can not figure out how to eject the cd


The eject button is just above the JVC logo on the display panel.
When you press eject and if it displays "NO EJECT", then it is locked. Press and hold CD and Power (ATT) for more than two seconds.

Feb 09, 2012 | JVC AM FM CD DET FACE CAR STEREO

2 Answers

JVC KD-R200 won't power up for more than 5 seconds


Check your wires they might be touching steel around your car mostly look at your yellow and red wires those are the 1' that give it power and light to your radio also check your radio fuse in the back.

Jun 10, 2009 | JVC KD-G200 CD Player

1 Answer

6 dsc changer stock radio 99 ford explorer cddj error


I've had GREAT success by resetting the changer. Try unpluging the changer with the power ON, wait a few, then plug back in. It's not hard to remove. Can I assume that you did NOT misload or install any CD' upside down? If not, then proceed with a reset. Can you eject the magazine? If so, proceed with reset. If you can NOT eject the magazine, then you will need to "open up the can" and do a manual eject with power assist by moving the gears while pushing the eject button. Sounds like a lot, but for me it's easy. Remember patience!!

Larry T
Winona Lae, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Jan 26, 2009 | Pioneer DEH-P6800MP CD Player

2 Answers

Due to remove the car battery from my car the stereo akking me for code (password) I know what is it, but where is the enter key on the detacheble face


1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "SECURITY" is
displayed.
3 Enter Security Code mode
Press the Control knob for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4 Select the digits to enter
Push the Control knob to [
4] or [¢].
5 Select the Security Code numbers
Push the Control knob to [FM] or [AM].
6 Repeat steps 4 and 5, and complete the
Security Code.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is
displayed.
8 Do the step 4 through 7 operation, and
reenter the Security Code.
"APPROVED" is displayed.
The Security Code function activat

Good Luck

Jan 12, 2009 | Kenwood KDC-MP528 CD Player

1 Answer

Freak Out!!!


Correct on the ribbon cable but parts can be ordered for it, duel has service centers, inc the one i work @. its abought a $10 part

Oct 07, 2007 | Dual XD-7500 CD Player

1 Answer

Power will not stay on


Sounds like you're not getting voltage on the accessory power lead. This is the red wire at the back of the deck, and it supplies power whenever the key is switched on. It's possible that your vehicle's radio fuse is blown.

Aug 11, 2007 | JVC KD-PDR30 CD Player

1 Answer

Cd wont eject.


I was having the same issue with my KD-S5050. I also tried the CD eject lock reset with no results. By using the following steps I was able to reset my CD player and it is working properly again. On page two of the user manual is shows how to do a full reset of the cd receiver. While holding SEL (Select), press ATT (Standby/On Attenuator) for more than 2 seconds. This will reset the built-in microcomputer. http://www.fixya.com/Brands/J/JVC/Manuals/kd_s5050_cd_d2ce2654fa2aab37f3ad2b4ce1e33443/images/KD_S5050_CD_D2CE2654FA2AAB37F3AD2B4CE1E33443_2_p2.jpg NOTES: ? Your preset adjustments ? such as preset channels or sound adjustments ? will also be erased. ? If a CD is in the unit, it will eject when you reset the unit. Be careful not to drop the CD.

Oct 31, 2006 | JVC KD-S5050 CD Player

2 Answers

JVC KD-LHX500 has power, but won't turn on!


try taking it all out and put it back in... That happened to me after I jump started my truck I took it out and just put it back in and it works fine now... just a thought

Sep 29, 2006 | JVC Sirius KD-LHX500 CD Player

Not finding what you are looking for?
JVC KD-SHX701 CD Player Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio Receivers Experts

kakima

Level 3 Expert

96627 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a JVC Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...