Question about Plantronics - Bluetooth Headset Plus Base & Headset

1 Answer

When i try to connect to my phone it will not although my phone recognises that the headset is there

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need the instruction to set up my plantronics explorer 220 bluetooth to my lg rumor

Posted on Jul 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No voice is heard even though it is connected


If you cannot hear the voice eventhough it is connected, do as follows:
• Ensure that the headset is charged, switched on, and paired with and
connected to your phone.
• Ensure that the Bluetooth feature is activated on your phone.
• Check that the headset is within 10 meters (30 feet) of your phone and
that there are no obstructions between the headset and the phone,
such as walls or other electronic devices.
• To reset the headset if it stops functioning, although it is charged, plug
the headset into a charger, and briefly press the power key and the
middle of the volume key. This reset does not clear your settings (for
example, pairing settings).

please dont forget to rate me.....

Good luck....

Apr 08, 2010 | Nokia Bluetooth Headset Headset

1 Answer

How do I program my Blue Trek G2 to my new cell phone?


Switch on your phone's Bluetooth, (usually under 'connectivity'). Allow; 'visable to all'. Switch on your G2.
Phone should recognise bluetooth signal, may ask for passcode, usually; 0000. You will then get message; G2 connected.

Nov 20, 2009 | BlueTrek G2 Consumer Headset

1 Answer

My nokia E63 wont find bluetooth headset


I had a similar problem with my headset.. but found the solution.. I am using Jabra 2010.. ok.. so just switch "off" the headset...go to the pair menu on e63.. then switch on the headset.. and then look for new pair devices option.. voila it came up. hv been trying for almost 3 weeks before i got the sequence right.. somehow if u had switched the headset on beforehand.. it wouldnt recognise it only.. the solution is here at jabra website .. although.. they dont hv e63 listed .. but the same procedure for e71 worked fine for my handset..

Jul 13, 2009 | Genius BT-03A Bluetooth Headset

1 Answer

Nokia 6500 will not pair with Parrot ck3100


Hi,

If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Parrot device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps
Season's Greetings from Fixya

Chris (ziraffa)

Dec 28, 2008 | Parrot MINIKIT Bluetooth Hands-Free Kit...

1 Answer

CABLE & WIRELESS CWBTH160


To initiate pairing, put the devices within 0.5m of eachother

Make sure phone / pc bluetooth is on and discoverable
Make surea headset is fully charged

  1. Ensure headset is switched OFF
  2. Press and hold the talk button (big central button on front of headset) until the indicator flashes red & green alternately, then release. Headset now ready for pairing.
    Note: Headset pairing mode will time out after 5 mins.
  3. To allow phone / pc to "find" the headset, consult your phone / pc bluetooth operating guide on pairing devices.
  4. Headset should be listed on phone / pc after search has finished - highlight and select the headset.
  5. A pin or password screen will appear, you must enter 0000 and confirm.
  6. When pairing is successful, headset indicator will change to green and flash continuously every 3 seconds.
Pairing is then complete.

Note: Multi-pairing.
It is possible to pair up to two phones with the headset - the most recently paired phone becomes the "primary "phone... only one phone can be connected at a time --> this function only works in Hands-Free profile. If both phones are in range, then the headset will connect to the "primary" phone first.

Apr 09, 2008 | Headsets

2 Answers

Bluetooth headset Nokia BH-600


You just have to press your blutooth on/off button a bit longer for 15 to 20 sec, when the LED blinking stops (noted that the LED should be turn ON but not blinking), try to search the device again with your phone. By that time your blutooth headset should be recognized by your phone, then select and enter the code 0000.

Jan 28, 2008 | Nokia BH-600 Wireless Headset

1 Answer

Frustrated


the phone may be blocking the headset. Bluetooth security can be turned on or off, letting the headset recognise the phone etc. Try this.

Jan 08, 2008 | Motorola Mobility H350 Wireless Headset

Not finding what you are looking for?
Plantronics - Bluetooth Headset Plus Base & Headset Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Headsets Experts

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Nataly Roberts
Nataly Roberts

Level 2 Expert

30 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Plantronics Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...