Question about Directed 434MHZ Remote Control

1 Answer

Need code for dishnetwork remote

I need the code to control the durabrand tv thru my dish network remot

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remote code for vizio Television

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i control my hitachi tv with my dish remote


gregpayne67,

In order to control your Hitatchi TV with your dish remote you would need to program it. The codes needed depend upon the model of your receiver, though I can provide some general codes. Below I have provided some codes and a link for more information and the steps to program the remote!

Codes: 585, 638, 665, 668

Link: http://www.dishnetwork.com/SupportSection/remote-setup

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Feel free to let me know if you have any other questions or you can email me at thomas.faust@dishnetwork.com

Tommy Faust
DISH Network

Aug 01, 2011 | DISH Network IR Remote Control

1 Answer

Im use dish remote control in my l g tv but need codes


Hello emanuelts! This Kimberly Escobar with DISH Network and I will be more than happy to assist you and provide you and help you with the information you need. You can follow this link http://www.dishnetwork.com/SupportSection/remote-setup here, you will find the codes to the different brands of televisions and the steps on how to program the remote. If you have any questions or need additional help please let me know You can reach me directly at kimberly,escobar@dishnetwork.com.




DISH Network
Kimberly Escobar
kimberly.escobar@dishnetwork.com

Jul 25, 2011 | DISH Network IR Remote Control

1 Answer

I bought a new TV and need to program my Dish network remote control


Hey scrappy32847,

Congrats on the new TV! I can definitely assist you with this and get it taken care of. As I don't know what TV you have I don't have any codes off hand available.

You can check out this link: http://www.dishnetwork.com/SupportSection/remote-setup to get the codes to program your remote. I have also listed the steps below to program that remote to your new TV.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

If you need any additional assistance you can reach me here or at thomas.faust@dishnetwork.com

Tommy Faust
DISH Network

Jun 24, 2011 | DISH Network IR Remote Control

2 Answers

I need a dish network code for a 52" Sharp Aquos.


Hi deidrapleasmy name is Mike Houston of DISH Network and I was going over your post and thecodes for your 52" Sharp Aquos are 628, 739, 521, 629, 741, 679, 112, 605, 625,111, 608, 740, 526, 585, 607, 652, 654, 655, 658, 669, 670 and 674. I will sendthe link to help with the setup for the remote to TV. http://www.dishnetwork.com/SupportSection/remote-control

Feb 14, 2011 | DISH Network IR Remote Control

1 Answer

I can't git my dish remote to work with my edge Durabrand.


Hi, my name is Cheri Torres with DISH Network CustomerService. We do have a few codes that you can try in order to get your DISHremote to control your Durabrand TV functions. I will list here for youour best codes for our most popular remotes and also the instructions foraddressing your remote to your TV. You will be able to find the model number ofyour remote on the back of the remote at the top. For the 3.0, 3.1, 3.2 and 3.4IR remotes the best codes for Durabrand TVs are 220 and 233. For the 5.0, 5.2,5.3, 5.4 and 20.0 IR remotes the codes are 220, 221and 523. For the 4.0, 4.4,6.0, 6.2, 6.3, 6.4 and 21.0 IR/UHF remotes the best codes are 233, 220 and 720.I hope you find these codes and instructions useful and if you have any furtherquestions or concerns feel free to email me at Cheri.Torres@Dishnetwork.com. :)

Instructions for addressing remote to TV
  1. Turn the Television On.
  2. Press and Hold the TV Mode button until all the other mode lights (i.e. AUX, SAT etc.) light up.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button. Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Feb 02, 2011 | DISH Network IR Remote Control

1 Answer

3.4 IR Dish Network remote control codes for a Prima TV/DVD combo. I can't seem to find any codes that work for either.


I'msorry I did also attempt to locate a Prima remote code within DISH Network's database aswell but unfortunately I was unsuccessful and have found no remote codesfor the TV you have. However, we can still attempt to program the DISH Networkremote to the Prima television without a remote code, this would be done bycompleting a Power scan. If you decide you would like to program the DISHNetwork remote to your TV using the power scan, I have included instructionsbelow to further assist you. Withthe desired equipment on, press and hold the correct Mode button (In this casethe mode button will be "TV") until all the other mode button back lightsilluminate, then release. 1. Pressand release the Power button. 2. Pressthe Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, theequipment will power off. 3. Pressthe POUND (#) button. If the codeentered is valid for the remote, the mode light flashes three times.
After successfully completing the power scan to program the DISHNetwork remote to your T.V the remote should now control your TV. I hopethis helped! Please feel free to let me know if you have any other questions orneed additional help. -Kirstie DISHNetwork

Jan 30, 2011 | DISH Network IR Remote Control

2 Answers

Need remote code for LG 32lcd350 TV for dish 3.0 remote


Hi there my name is Kimberly Escobar with DISH Network Customer Support. I understand you need the codes to program a DISH Network remote model 3.0 to an LG T.V. Some of the codes we have are 678, 506, 520,123, 000, 512, and 213. To integrate the code into the remote you would need to press and hold the clear T.V button at the top until all the other top buttons light up in red, then once you see them light up you would need to enter one of your codes followed by the pound key (#) for example if you choose code 678 it would be 678#. After you press pound the T.V button will flash in red 3 times after that try the remote and make sure it functions with your T.V. I hope this is helpful to you. You can also view this link http://www.dishnetwork.com/SupportSection/power-scan-instructions which contains information on how to program your remote to your T.V using a different procedure. If you have any additional questions or concerns please feel free to contact us directly at 1800-333-DISH thank you.

Sep 05, 2010 | DISH Network IR Remote Control

1 Answer

Codes


scorpionjdl6

I have provided a link with instructions on how to program the remote to your Magnavox TV and with the remote codes. I hope this helps.

http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

Mar 02, 2010 | DISH Network IR Remote Control

1 Answer

I am trying to control the basic functions of a Samsung HT-Z320 using my Dish remote. Cannot get there using Dish technical support. Is this possible, and if so, how?


rpallot,

I have provided a link on how to program the DISH Network remote to the Samsung TV. The link is:

http://www.dishnetwork.com/SupportSection/remote-setup

A link for the remote codes is also included.

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

I hope this helps. If you have any other questions, please respond to this link.

Ray Calo
DISH Network

Jan 08, 2010 | Universal Remote Control DISH Network...

1 Answer

Control code


leoidalgo

I have provided the remote codes for your Zenith TV. I have also provided a link with instructions on how to program the remote to the TV. I hope this helps.

Remote codes: 501, 652, 766, 500

Program remote, step 6:
http://www.dishnetwork.com/SupportSection/remote-setup
Ray Calo
DISH Network

Jan 06, 2010 | DISH Network 142923 Remote Control

Not finding what you are looking for?
Remote Controls Logo

1,639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directed Remote Controls Experts

Cindy Wells

Level 3 Expert

4753 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

John Miller

Level 2 Expert

253 Answers

Are you a Directed Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...