Question about Zenith E44W46LCD 44" Rear Projection HDTV-Ready Television

1 Answer

BRIGTHNESS TO LOW

I replace the lamp twice, it works but the brigthness it so low,tv model E44W46LCD rear proyection

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Light in wrong, however I wouldn't waste the money on this unit. Light engine will fail in 3 to 4 years and show a yellow spot at first.

(ie past post)
The yellow spot is due to the BLUE LCD and/or lens assy cracked, reason, to much HEAT! The blue is the darkest color and hold the most heat, so it goes first, always! In some cases it’s only the lens, however most of the time LCD is damage to. Parts are available, however install and alignment is timely. Quick fix is the complete light engine, which for model# E44W46LCD is part# 3141VSN916C, which customer cost is $1,449.27, wholesale for about $1,065.21. Rebuilt, if you can find it around 850.00 to 950.00. However the rebuilt does not always look as good as factory. My advice, TRASH set. This part will fail again in about 3 to 4 years, unless you watch a lot of white video. Remember, on a black or dark picture, all three LCD are blocking 100% of the light, causing extreme heat within the light engine. It’s a bad design.

TV Tech

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SONY WEGA KDF-50WE655 PICTURE IS DARK MY LAMP IS ONLY 2 MONTHS OLD


Where did you buy your lamp? sounds like its not a real philips or osram. Discount merchants sells some junk lamps. If you got it there, thats your problem

Jun 13, 2016 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Zenith E44W46LCD TV power/operation indicator lamp blinks green then goes red when power switch pressed. I can hear the fan motor but no picture. No history of lamp indicator warning.


If the tv projection lamp already been inside the tv now like a 1 1/2 or 2 years?Tv used it every day like 4 or 5 hrs every days?Yes?Than it is the tv projection lamp have to be replace,because the tv projection lamp life span have ended.

Sep 04, 2011 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Should I replace the bare lamp or the complete housing for the bulb in my Zenith E44W46LCD TV?


Replace it with the complete housing with a bulb inside.The easiest and the safest way to do a replacement of a tv projection lamp.

Sep 04, 2011 | Zenith E44W46LCD 44" Rear Projection...

3 Answers

I have a Samsung HLR5656 model and the picture is now very dark even DVD are dark. Still watchable but it looks like everything is shot at night time.


Hi,do you hear any strange noises? If you hear clicking or like wanting to turn on it could be the board that powers the lamp it's called the ballast.Here's the instructions to replace it :http://www.fixyourdlp.com/guides/samsung/bp47-00033a.php But if you don't hear any strange noises,tv is around 6000 hrs,2-4 yrs it could be time to replace the lamp.The lamp you need is BP9600826A You can find it here:http://www.discount-merchant.com/Samsung-BP96-00826A-Lamp-Enclosure-p/samsung-bp96-00826a-lamp-enc.htm?Click=48173. Have a blessed one!

Apr 19, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Reseting the end of lamp life indicator


Hold down mute button on remote and enter on TV
at the same time for a few seconds, you should get
a screen promt asking if you want to reset the timer
for the lamp.

Mar 31, 2009 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

How do i replace the bulb on a zentih e44w46lcd 44?


Do you have the bulb yet? There should be some instructions with it. It's very easy, just don't touch the lamp with your fingers. I've changed mine twice.

Mar 28, 2009 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Dark picture


I removed the back from the tv and cleaned the lamps, mirror and inside of the screen with window cleaner. The image is now clear as the day I bought the tv.

Sep 22, 2008 | Projection Televisions

1 Answer

Zenith E44W46LCD turning off


That would be the first thing I would try as it is probably flakey.

Jul 06, 2007 | Zenith E44W46LCD 44" Rear Projection...

Not finding what you are looking for?
Zenith E44W46LCD 44" Rear Projection HDTV-Ready Television Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Zenith Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...