Question about Kenmore 92022 / 92024 / 92025 / 92029 Electric Kitchen Range

3 Answers

Kenmore F2 Error

Hi, I am getting an F2 error on a Kenmore 92024101 model. I reseated the connectors in the back, but no luck. Thanks, Paul

Posted by on

  • paulsmircich Jun 28, 2008

    How d I repair the problem

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,028 Answers

FYI: for F2 error; it's a "Communication failure between EOC and ESEC system. Recommended action: Test harness/connections P4 (EOC) & P11 (Surface Element Control Board). If harness checks OK, failure can be caused by faulty UIB, surface element control board, or EOC."

The Virtual Repairman's Appliance Help :: Log in
http://repair2000.com/Library/frigidaire_oven.pdf

Posted on Jun 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 92 Answers

Well of course the F2 is the error for runaway temperature, and so based on that, it looks like the sensor or ERC could be bad, however check the connection for the sensor

Posted on Jun 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

The "F2" error code in most cases means runaway temperature.

Posted on Jun 28, 2008

  • Priya darshan Jun 28, 2008

    Please try replacing the sensor.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91136669891 HAS ERROR CODE F2 F3


Are you sure about this error? The 91136669891 was made by Whirlpool for the Kenmore line. The 4 character codes for these ranges are F# E# (not two Fs).

Depending on which error you are actually have see below.

If the code includes F3 then you have a problem with the oven temperature sensor (F3 E2 would be temperature too high). You need to replace the sensor. Sears Parts Direct has the sensor for $74.12: http://www.searspartsdirect.com/partsdirect/part-number/Kenmore-Parts/Range-Parts/WB21X5301/0022/364/Model-91136669891/0582/0124250?keySuffixId=NA&pathTaken=partSearch&pathRender=modelComponent&documentCompId=P9040087&diagramPageId=00005&productTypeId=x&searchModelNumber=91136669891&subCompDesc=Body&brandDesc=KENMORE&modelDesc=30 . The complete diagram of the oven parts is available here: http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Range-Parts/Model-91136669891/0582/0124250/P9040087/00005?blt=06&prst=&shdMod= . The sensor is part 253.

If the code includes F2, then double check the second code. Whirlpool has no F2 E3 error that I know of. However, F2 errors tend to be a problem with the keypad. Check the wiring connection between the keypad and the control. This should be firm. Then press Cancel. If the error persists, you need to replace the keypad. See http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Range-Parts/Model-91136669891/0582/0124250/P9040087/00001?blt=06&prst=&shdMod= for the parts diagram and prices.

I hope this helps.

Cindy Wells

Nov 23, 2011 | Kenmore Kitchen Ranges

1 Answer

DELL INSPIRON 1545 (Windows 7) My laptop is displaying the message below when switched on: Internal hard disk drive not found. To resolve this issue, try to reseat the drive No bootable devices...


Hi
It seems that the Hard Disk is disconnected from it's connectors
It needs to be fixed and installed correctly.
To do that, there are screws in the back, remove them and disconnect the hard disk, and reconnect, fix it correctly.
If it's difficult to you, go to technician to do that.

Please, Tell us your results.
Good Luck

May 20, 2011 | Dell Inspiron 1545 Notebook

1 Answer

Kenmore model 95781000 shows error code EO-F2- what is the definition of this code?


Hi


Thanks for using FixYa. Error E0-F2 means shorted keypad and to resolve this issue you’ll have to replace the electronic range control/keypad assembly.
Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 21, 2010 | Kenmore Kitchen Ranges

1 Answer

I have a kenmore gas range and on the display is says EO F2


The "F2 - E0" error code means "Shorted keypad".

Remove power from the range, open the control panel and unplug the membrane switch ribbon from the control board.

Reconnect power to the range and observe for an hour.

If the error code reappear - replace the control board.

If not - replace the membrane switch.

If I get the model # I can help you pind the right parts.

Good Luck and please rate 4 thumbs for the free answer

Apr 17, 2010 | Kenmore 30 in. 32384 / 32385 / 32389 Gas...

1 Answer

ACCU BAKE codes come up e6 f2


You have the following error.
Cancel key drive line open

1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Michael Anderson
Anderson Appliance
(865)945-3808

Feb 10, 2010 | Kenmore Ovens

1 Answer

Kenmore microwave model 63792 displays F2 error message


The F2 error code on your microwave oven is a membrane failure.
It is recommended that you replace the membrane first & if you still have problems to replace the control board.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 21, 2009 | Kenmore 63792 Microwave Oven

1 Answer

F1 error message Kenmore Electric range model 790.95680301


Hi

F1 error means that you have either a bad ERC (clock) or a bad touch pad. To check these please follow these simple instructions:
  1. Disconnect power to stove
  2. Gain access to the back of the clock (electronic range control or ERC).
  3. Unplug the touch pad ribbon connector from the ERC. This will be a flat wire approx. 1 1/2" to 2" wide.
  4. Make sure everything is clear and will not short out when power is turned back on.
  5. Turn power back on to stove.
  6. Watch for the F1 and listen for the beep.
  7. If you get the F1 and beep, replace the ERC.
  8. If after approx. 30 minutes you do NOT get the F1 and hear the beep, replace the touch pad.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 10, 2009 | Kenmore Kitchen Ranges

1 Answer

Kenmore Select Clean Self-Cleaning Electric Range Model 6659580


This means you hace a problem with your clock. Take the back off the stove and then pull the ribbon connector off the clock and clean the terminals. If that doesnt fix it replacing the clock should fix it.

Nov 16, 2008 | Kenmore 91112 / 91114 / 91117 Electric...

1 Answer

Errror code


HI. thanks for the question. the fault code EO F2. means the touch pad key board is the problem. to repair new parts listed . thanks the appliance doc

Sep 16, 2008 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

F2 error code


Chia, this is not a good one, F2 is a keypad failure or interface mismatch. You can try a couple of things. 1. unplug the washer for a minute and see if the code returns. 2. Remove the consol to access the control board, three screws on the backside and the consol lifts up. On the right side you will see the main board. On the right side of the board, center harness will be the interface ribbon cable. Reseat it a couple of times. If this doesn't work, I believe you will have to replace the touchpad. Catriver.

Jan 13, 2008 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Kenmore 92022 / 92024 / 92025 / 92029 Electric Kitchen Range Logo

Related Topics:

1,164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Cindy Wells

Level 3 Expert

4951 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...