Question about Black & Decker (050876530606)

1 Answer

Grass Hog XP GH1000

The motor runs when trigger engaged but trimmer head will not turn.

Posted by on

  • Anonymous Aug 06, 2008

    Belt came off. I took out all the screws (including the one hiding under the paper label that gives directions on turning for edging and height adjustment) Saw belt came off, but couldn't get it back on without bending larger of the two grooved pulley. Poor design. Way to go to China B&D!!!!


1 Answer

Internal belt broke. Have to go to a black and decker service center to get a new one.

Posted on Jul 15, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers


The brew values are blocked , you need to get it serviced it will fix the issue.................

good luck...........

May 11, 2008 | Saeco VIA Venezia

2 Answers

Brew unit blocked message The brew unit removed and switches jumped, motor turns message still blocked brew unit . what could it be and ways to tests.

I had the same issue. Very difficult to fix. You must remove brew unit and reset the machine while apart. You must trick the machine to think brew unit is installed and door closed. Look at door and brew unit and use screwdriver or butter knife to engage machine and run through cycle to reset.

Jul 09, 2011 | Starbucks Saeco Italia Digital Barista...

1 Answer

I turn on machine & it starts to draw water straight away ( without the coffee button being pushed) only way to stop it is to push in steam button

What you are describing sounds to me as though your steam knob is open. Close it by turning it clockwise, or toward you. When this is open, it is drawing either water or steam, depending on whether you engage the steam button, and you will always hear the drawing (motor) sound.

Feb 07, 2011 | Saeco VIA Venezia

1 Answer

I turn the machine on and the light blinks and it will not heat the water. I have tried using a magnet to move the float, but the float is at the top.

Do you see a fast or a slow blink? If you see:
  • A fast blink: the machine has encountered some condition that prohibits it from engaging the heater element. This could be a low water level detection (the float being in the high position doesn't mean the Reed relais is also triggered!), some other malfunction or a power problem. To rule out the latter, plug the Senseo into another wall socket, preferrably another electric group.
  • A slow blink: your Senseo is feeling happy and is unaware of a problem. This may point to a defective heater element. If you do hear the rumbling noise of water being heated, it's most likely the temperature sensor - both are cases for the repair shop.

Sep 05, 2010 | Philips Senseo HD-7810 Coffee Maker

1 Answer

Even after adding water to resorvoir, the motor does not turn on to pump water.

What is your display showing? When you plug in the unit is it off, or do you need to turn it on with the power button?

I'm spending my saturday working on a similar problem. Mine automatically turns on and goes to a "not ready to brew" screen, no buttons work, and the motor will not engage. I put in request to their support line, will let you know if I get it working...

Mar 06, 2010 | Keurig B60 Coffee Maker

1 Answer

I cannot brew one pot after another. It seems that the heating element will not cool off so it will not trigger the fresh pot to brew.

Do you turn off the pot before you refill the reservoir to brew the second pot? The heating element should not have anything to do with triggering the second pot. Turn off the coffee maker, change/refill the coffee, refill the reservoir and turn the pot back on. This works on my Cuisinart.

Dec 10, 2009 | Cuisinart DCC-2000

1 Answer

Clear coffee?

Hello, After many years in the coffee game there are only 3 possible reasons for this, either the water is not heating, this would cause the water to not extract the coffee from the grounds. Or your filter is folding over and the water is running down past the filter....Lastly and the most probable is the spay head is blocked and the water is coming out the over flow if there is one, which is then bypassing the filter. Things to check would be heat, spray head and filter. Hope this helps...Mike

Aug 14, 2009 | Krups XP 1500 Espresso Machine & Coffee...

1 Answer

Airlock in new machine

I have a similar problem, I think. I get water through the steam thing, but not through the brew head. Not sure what to do either.

Oct 07, 2008 | Gaggia Classic Espresso Machine

Not finding what you are looking for?
Black & Decker (050876530606) Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Coffee Makers & Espresso Machines Experts

Jack Reed

Level 1 Expert

30 Answers


Level 2 Expert

86 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Black & Decker Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides