I had the same problem many times, and I don't have the original remote. Go into your menu options and select Auto-Program. It will run through all your channels, but when it is done, PIP will be off !! I have PIP!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To enter into the convergence service of your sony, follow the steps below;
Press "Menu" on the remote control. Use the up- or down-arrow button to move the cursor to "Setup" and then press "Return."
Use the up or down arrow to move the cursor to "Convergence" and press
"Return." This will bring up the convergence-adjustment screen.
Press the up or down arrow to move the cursor to the line you want to
adjust (either vertical or horizontal for red and blue) and press
Press the up or down arrow again to move that line until it converges with the center green line and press "Return."
Repeat to adjust the other lines until all three lines converge and are seen as a white cross.
Press "Menu" to exit the convergence menu and return to the original screen.
You can as well follow these steps;
Press the "Power" button to turn your TV on.
Wait at least 30 minutes before you adjust the convergence in your
television. This allows your TV ample time to warm up before you make
Turn your TV to a cable channel or to an antenna channel with a picture
that you can see. A music channel with a static shot of music notes
isn't the kind of picture you need. Instead, look for a picture like
what you would see on a movie, sitcom or drama.
Press the "Flash Focus" button located in the front panel on your TV.
You may need to open a hidden compartment on the front of your TV to
access this button. The convergence will repair itself automatically
after you hit this button. It may take several minutes.
Any of the two processes are detailed steps on how to enter your convergence service.
I had this problem with a universal remote.I tried everything you can think of.Finally I got it.I hit the setup button on top of tv and the volue down button to start the demo.I dont know exactly how long it ran but after awhile I hit a button and screen was normal...Yeah