Question about Evesham Emedia Ebox (EBOXAPR04) PC Desktop

1 Answer

Fails to start and lost Windows Startup CD!

We have an Evesham eBox and it now fails to boot. It boots and then loops into the bootup options of "safe, normal" etc..
Microsoft help pages suggest run chkdsk from the Windows Startup CD. Problem is, we cannot find the Windows Startup CD. Do you know how we can get a new CD? Can't find a Windows Media Centre Edition download on Microsoft.

Posted by on

  • witzpromos Mar 23, 2009

    pc resets after windows logo

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 62 Answers

Evesham is no longer in business but the following url is for a company that supports their products..
http://www.tewktech.com/

As a matter of fact, I understand this company has ex-Evesham employees. Good Luck and please rate this solution ...

Posted on Mar 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My 7750 stuck in boot loop


You should try to remove all usb devices from your computer. Just have the charger plugged in nothing else, if it is still not working you can try one of those windows startup disks.

Jul 27, 2016 | Computers & Internet

1 Answer

How do I make Dell 530s boot and load windows?


Are there any sets of audio 'beeps' that occur during startup? If you get anything other than a single beep during startup, it could indicate an error code for hardware failure detected during the POST phase of bootup.

If you have recovery or Windows installation CD's, try pressing F12, go to the bootup menu and try booting from the CD.

Look at the bootup menu and see if there is a hard drive as one of the options. If the hard drive is not there, or if you try to boot from the hard drive from that menu and you get error messages, that might indicate something wrong with the hard drive.

If you can boot from the CD, you may be able to use the Windows Recovery Manager to restore Windows on your hard drive, if the hard drive is working. There may also be a recovery partition on the drive that will allow you to recover Windows, but beware that files on the hard drive may be lost when you use the recovery partition.

If you have files on the hard drive you need to recover, you may be able to remove the hard drive, put it on an USB drive adapter, and use another PC to copy files off of the old drive, even if it cannot boot the old computer. After you have recovered your files, you can try the recovery partition or format the drive and use Windows install disks to restore Windows to the drive.

Apr 01, 2015 | Dell Computers & Internet

1 Answer

Dell Inspiron 1440 notebook failed to start windows


You probably have a mbr virus. Try this:

Download The following iso listed below. It is the latest version of the Kaspersky rescue disk. You need to burn it to a CD with a program like Imgburn (Which is also FREE like the iso file). Then you need to boot from the CD and run the scanner. It should fix you right up.

Kaspersky rescue cd download:
http://majorgeeks.com/downloadget.php?id=6501&file=1&evp=ef4247319d4b536cb88b74d1ae4842b0

Imgburn download:
http://majorgeeks.com/downloadget.php?id=4870&file=15&evp=0636b68877cb69b15faa3374cb1dcd89

Aug 17, 2012 | Dell Inspiron 1440 Notebook

2 Answers

I have an Evesham Evolution desktop with Windows XP SP2 product recovery disc. I want to reformat the drives and carry out full "clean" install and reload all software. I insert the recovery...


It sound like you have a recovery disk not an install disk. The recovery disk you have just lets you repair windows only. If you insert the disk after windows starts and it runs you can then try to back up what you want and delete what you don't want, then run a windows repair. Its the only option, My other suggestion is to purchase Windows 7 and do a clean install.

May 09, 2011 | Evesham Evolution PC Desktop

1 Answer

My xps i don't come on when you boot up the CD light comes on for a second and then all I get is a black screen


When you boot up hold down the F8 button on your keyboard until you see start up options then click on start up repair
  • Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that came with your computer or go to the manufacturer's website.
  • Change restart settings in safe mode. If your computer is stuck in a loop where Windows fails, attempts to restart, and then fails again repeatedly, restart your computer in safe mode and select the Disable automatic restart on system failure checkbox. For more information, see Advanced startup options (including safe mode).
  • Reinstall. If no other options have solved the problem, and you are sure that your computer's hardware is functioning normally, you might need to reinstall Windows. A custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After the installation, you will need to reinstall your programs and restore your files from backup copies. For more information, see Installing and reinstalling Windows‌.

Jul 30, 2009 | Dell XPS One All-in-One TV Desktop with...

1 Answer

Ebox fails to load up


Evesham is no longer in business but the following url is for a company that supports their products..
http://www.tewktech.com/

As a matter of fact, I understand this company has ex-Evesham employees. Good Luck and please rate this solution .....

Mar 11, 2009 | Evesham Emedia Ebox (EBOXAPR04) PC Desktop

1 Answer

Can't 'Launch Startup Repair' when Vista boots on Evesham Laptop


when you restart try to press F11 while booting..check

Jan 05, 2009 | Computers & Internet

3 Answers

Windows will not start


Ok ...that message about the PXE is showing up because the computer cant find an operating system on the hard drive for some reason.

Try booting from your Vista DVD ,let setup start then running Start Up repair ....

3. If prompted, press any key to start Windows from the installation disc.
NoteIf your computer is not configured to start from a CD or DVD, check the information that came with your computer. You may need to change your computers BIOS boot order

4. Choose your language settings, and then click Next.
5. Click Repair your computer.
6. Select the operating system you want to repair, and then click Next.
7. On the System Recovery Options menu, click Startup Repair. Startup Repair might prompt you to make choices as it tries to fix the problem, and if necessary, it might restart your computer as it makes repairs.



Jan 02, 2009 | Microsoft Windows XP Professional

1 Answer

Windows fails to start and startup repair does not work.


Your startup repair option in Windows Install indicates a hardware conflict. Go to your System Setup in startup mode, by pressing Del, F2 or F10 whichever the hint is on screen during bootup. Once inside system setup, turn off almost everything, disable Speed Stepping in EPower, set monitor off to disable, Standby and Hibernation off as well. Turn off the modem and Network adapter if yo can. Just about everything that affects a device on the laptop. This would also include the Touch Pad if you're using a mouse.

And, in the long run, you may need to do a full Windows Install if the repair option continues to fail. Many of these failures are due to the Virtual Memory file size for Drive C being too low. If you can get into Safe Mode change this setting, right click My Computer, select Properties, go to Advanced, advance and change Virtual Memory on C to a fixed size about 1024Meg for min and max.

Also, should you be low on free space for drive C this could cause the same problem. You would have to choose a Full Install as an Option unfortunately.

In the absence of anything along these lines working, you should be able to choose Restore Acer option (or words to this affect), you would want to tap on F8 while booting, sometimes its F10, but this gives you a 'boot from what source' option, CDROM, Hard Drive or Restore Partition. Choose the Restore Partition and start over from scratch again.

Sorry, but this often happens and you and I have to live with this.

If you need any clarifications on what I've just stated, use the Comment Box Text Entry box below to send me a message. I'll get an email alert and will get back to you as soon as I can.

Regards,
Worldvet

Nov 06, 2008 | Acer Aspire 5500 5570-2609 Laptop

2 Answers

MSI K8TNeo2-F v2.0


This is not too uncommon scorcher63.
From what you stated, when windows does start it only goes so far & than re-starts it's self, like loading in a loop. Than at times it loads the start up options.
For reasons unknown, your windows (startup files) are corrupted. Easyest way to fix this is. Put you windows CD in the cdrom, shut down the system. Start the PC & press the F8 key every 2 seconds. A boot menue will load. Use the up & down arror keys & choose the cdrom drive. You will see (to boot from cd press any key), press the space bar. The cdrom will startup. Windows will start to load. You want to repair windows. This option will re-install windows but will leave most of your personal data alone. Like My Documents your username. Some programs "may" need to be re-installed. After installation is complete remove the windows cd & shut off the PC. Start the Pc, windows should load. Run Windows Update. If you have a antivirus program please do a full system scan. Run windows Defrag program.
scorcher63, if you have more question just post them here.

Feb 21, 2008 | MSI K8T Neo2-F Motherboard

Not finding what you are looking for?
Evesham Emedia Ebox (EBOXAPR04) PC Desktop Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evesham Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you an Evesham Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...