Question about Hoover Nextra HNWL 3136 Front Load Washer / Dryer

1 Answer

Dryer not working

Washer part works fine but the dryer does not get hot.

Posted by on

  • ng4mel Aug 14, 2008

    yes a lead has broken

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thermostat on top of dryer heater may need to be reset . Unplug and remove top and just push gently the thermostat (red) you may hear it click .now reset or perhaps a lead as broken to the dryer heater .

Posted on Jul 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dryer part of the washer/dryer is not getting hot anymore


hay Darren , If you have an electric dryer it may be a element or fuse , if its gas it may be bad coil or fuse . The washing machine does not heat the water rather bring it in from the boiler therefor its unrelated to the dryer .good luck APPLIANCES R EN

Mar 01, 2013 | Washing Machines

1 Answer

I have a Frigidaire GLET1031 Top Load Stacked Washer / Dryer. The water valves do not work unless the dryer is turned on. Also the washer drum will not spin with dryer on or off and the dryer does not get...


Hello,

WHat ya need to check is for proper power going to the entire unit it sounds as if either a breaker is off or their is burnt/broken wire from the main power connection.

All symptons listed i suppose occured suddendly?? and to me its a lack of proper electrical power that is causing all of them.


GENE

Oct 03, 2011 | Frigidaire GLET1031 Top Load Stacked...

1 Answer

My stackable washer/dryer laundry center no longer allows adequate flow of hot water. It was fine one load, and hasn't worked since. Now it just trickles hot water into the washer. Any ideas?


Hi from retired Englishman in SW France,

If you have checked that the hot water tap is turned on fully and the hose is not kinked or squashed at the back, it is worth while checking the hot water inlet filter. Turn the tap off and remove the hot water hose at the washer end. Inside the inlet port there is normally a little filter which should just slide out. Clean if necessary and replace it and the hose. If after turning the tap back on there is no improvement, the problem is symptomatic of a malfunctioning hot water control valve. Sorry but it needs replacing and a service call ;-0(
Good luck,
John C

Apr 07, 2011 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Dryer works fine. thr exhaust vent is clear but the air coming out is cold not hot


Thanks to Guru's extra tip re Breaker Half closed the machine works fine. Saved me money on service call. Thanks again. michaelk960

Oct 11, 2009 | GE WSM2780W Stacked Washer / Dryer

1 Answer

My space saver dryer will not get hot ,everything else works fine


If everything else works, but not heating, than the problem is either:
Clogged air ducts
or
Heating element needs to be replaced.

Jun 05, 2009 | GE Spacemaker Washer and Dryer Electric...

1 Answer

Clothes wont dry but gets really hot


make sure your exhaust line is clear and not kinked

Oct 24, 2008 | Washing Machines

1 Answer

Clothes wont dry but gets really hot


Hello, sounds like your cold water feed hose has got a kink in it. The machine needs cold water to condense the steam. Just pull out the machine and slowly slide back into place.

Oct 21, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Electrical how to make it to 120v.


The drive motors for the washer and dryer run off 120 VAC, but the heating circuits require 240 VAC in order to work. You will need to have a 240 VAC outlet installed in order for the appliance to run properly. There is no conversion for this. This is the way the appliance was made.

Oct 07, 2008 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Dryer problem


front load washing machine all in one are designed to use water supply also in drying cycle to condensed the hot air & move it out to outside , can you check the faucet if its open, so the moist unside the drum can out to the drain and the machine dry properly,if its ok & no water fill to drum may be your inlet water valve for the drying cycle has a problem.So that the time to call a technician to check it .

May 01, 2008 | Electrolux EW1200i Front Load Washer /...

1 Answer

Washer wont start


your vent is prob. stoped up so the dryer got to hot a blew a thermal fuse..it is located at the top of the element housing

Apr 12, 2007 | GE WSM2700W Unitized Spacemaker Washer and...

Not finding what you are looking for?
Hoover Nextra HNWL 3136 Front Load Washer / Dryer Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...