- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have a universal remote control, you can use its code search feature to try to find a code that works. If you search through allcodes stored in the remote without success, you may have to try another universal remote. Different remotes may have different codes.
if remote is universal remote, you will need to find the code to correspond with the maker of the television, most universal remotes come with programing instructions, check owners manual of tv for codes which now adays they include. Without the model number, i cannot help further, other than suggesting you try fresh batteries and make sure the sensors are clean on tv and remote.. best of luck
Hi, as the sets get older the codes for older models get deleted to make room in the remotes memory chip for the newer models, this is probably why none of the universals will work for you, post the model number found on the back cover of your tv & I`ll look it up to see if theres a sub or the original is still available, video-tek
Not all Philips TVs use the same remote codes.
It is very unlikely that the TV remote receiver is the problem (trust me).
Is this the original remote for that set?
If not, try program it as a universal with the other Philips codes or get a universal remote and do the same.
Here is the website for remote codes:
What type universal remote do you have? Try searching online for the manufactures site they should have information on the sequence to program as well as the various code for any given brand of TV. Often the model number is located in the battery compartment on universal remotes if it's not printed on the exterior.
I just bought a 32" dynex lcd and saw that i couldn't program my two $5 ge remotes to work it. From reading in this forum and others I'm not the only one with the problem, I thought I was stuck with only the dynex remote. But the dynex website tells you how to get universal remotes to work,
It tells you to try the codes for Orion, Emerson, Memorex, Sansui, Sylvania, Zenith. The second orion code worked for me. both my ge remotes look and work the same but one uses a four digit code and the other uses a three digit code. I used 0135 on one and 135 on the other. There is a good chance that if you try the codes for the brands dynex lists you will find one that works. The 0135 or 135 might work for most dynex tv's.
If you have a ge remote and haven't programmed it for volume punch through you might try it. It allows the tv volume to be controlled using the ge remote even when it's set to something other than tv.