Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

3 Answers

Beeping noise, tv won't turn on

I have a 52 in rca tv model no. d52w20. the tv has been in good condition since we got it besides having to replace the green projection cannon. this is the 2nd time though that the tv will not turn on and there is a distinct beeping noise when you press the power button on the tv or the remote. the tv sounds like it is getting power but nothing happens. we have fixed this problem before, it was something with the power cord connection box where it connects internally to the tv. is there an easy that i can go out and buy and install myself or will i need a tech to do it or take to the shop? thanks in advance. when tv is pluged in there is no picture and tv beeps. jon

Posted by on

  • glophus Jun 30, 2008

    I would like to find a solution to fix my RCA guide + gold gemstar 52 in tv. when it is plugged in it beeps and the power wont turn on. i was hoping to find a specific part to replace. are there tests that i can run with a volt meter to narrow down the problem? thanks...jon

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

Chirrping.....is indication of shutdown issue first thing to chech is make sure that the flat ribbion cables foint from the green board over to the power board are in place...this set shuts down for many reasons.. the most likely in your case would probalbkly be a blown horizontal output transistor. which could also mean a blown flyback transformer. If you have some electrical experience i can guide you through this.. Let me know if you want to fix it yourself..

Posted on Jun 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

No chance for testing with out a volt meter sir.

you must need a volt meter to find out the defective component.

Posted on Jun 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Your best solution would be to take it in to a shop. As that is cheaper then them coming out and the job will be done right. If you need any help finding someone let me know. You can also use fixya.com 's homepage and enter your zip code.
Keep me updated.
Thanks,
Lee

Posted on Jun 28, 2008

  • 1 more comment 
  • Lee A.
    Lee A. Jun 28, 2008

    Also give those a shot just to make sure though it seems like you will need to have it serviced as this may be a power issue.
    • The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the
    Parental Control menu and press OK to uncheck the box.
    also
    • Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the
    voltage in your house may be abnormally high or low.
    • Unplug. Wait five minutes. Plug in again.
    Keep me posted.
    Thanks,
    lee


  • Lee A.
    Lee A. Jun 30, 2008

    First you want to take the back off and visually inspect all the boards. You can check the capacitors for bulged tops. It is also best to check the bottom of the boards to look for bad solder joints.
    Thanks,
    Lee


  • Lee A.
    Lee A. Jun 30, 2008

    you asked if it was easy and no it is not that easy. You should have experience in it and be fully confident. It will most likely not cost that much to repair. You can call and get an estimate first to see if that is the route you want to take.
    Thanks,
    Lee


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

You can"t get it to turn on. It is a RCA 52" HD


Replace cp120 & cp150 on the board to the left, known as the deflection power supply.

Dec 20, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Tv won.t turn on on switch turns on makes noise then turns off


Look for Bad capacitors on your Deflection Board. it will be the bottom left hand Board that has FBT flyback Transfomer CP150 2200uf 16v use 25v
CP114,120 220uf 35v If they are Puffed up on Top Replace all 3 caps.

Mar 24, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Rca scenium 52 in dlp tv made pop noise now sounds like a clicki


very common problem for your model You will need to replace the flyback. Your model uses the 259296 flyback. You can get a replacement flyback at the following link with free insstallation instructions with pictures so you can easially fix it yourself. Read the reviews on the flyback to get an idea on how easy the repair is. Heres the link.
http://servicemanuals.vstore.ca/

Jan 23, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Have a 52 inch rca d52w20 rear projection tv, the tv was on then it just turned off..attempted to turn it back on and heard a sqeaking noise and tv will not turn back on.. please help..


replace the flyback, very easy repair. You need flyback 259296 you can getone at the following link with free step by step instructions with pictures. heres the link read their reviews.
http://servicemanuals.vstore.ca/

Jan 22, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

MY TV WANT COME ON


go to radio shack or target before they close and buy an rca brand universal remote you wont even have to program it to your tv good luck

Sep 22, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA 52" D52w20 problem


My goes off a few seconds after turning it on. It does make a funny sound, like static on the tv.

Aug 26, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

52 inch RCA - green light turns on & off, BUT no picture


CP150 is a capacitor in the power supply circuit....feel top to
see if flat....change if "pooched" or swollen..................T.

Apr 15, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Buzzing sound


I'm no Expert, but I have worked for a major statelite tv company for the past 7 years,one thing you can check besides the channels, would be the video inputs, see if you have the same issues with different components dvd vcr etc.. if so it would be narrowed to the tv or poss connections to the tele..

Oct 30, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...