Question about Digital Cameras

1 Answer

My camera battery died while the camera was still on, and the viewfinder was stuck out. when i got home, it was slightly twisted. now, when i turn it on, i hear funny noises and i can't zoom in on anything at all. please help! i dont want a new camera! i like mine!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Contact the manufacturer to find out about sending it in. If it still under warranty, the repair may be covered. Hope this helps!

Posted on Jun 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony cybershot camera fell and lens is stuck


The lens may be out of position, or there could be dirt/dust in the lens mechanism. You could try some of the following suggestions:

1: Switch on the camera while you hold the shutter button and connect it to the AC adapter or to the USB cable at the same time.
2: Now by default the lens should get properly aligned if not try to twist them slightly by holding down the camera lens with soft hands.
3: Just push and pull the lens slightly as it extends automatically.
4: Now when the lens is in the hard surface power on your camera.
5: Try to hit the camera softly beside the lens which might solve the issue.

Sep 07, 2014 | Digital Cameras

1 Answer

HOW DO I WORK A DIGITAL CAMERA?


STEP-BY-STEP INSTRUCTIONS FOR OPERATING YOUR FIRST DIGITAL CAMERA
1. READ YOUR CAMERA MANUAL before taking any photographs.
2. Check your batteries. Make sure to either recharge or replace them if you haven't used your camera as yet or for an extended period.
3. Insert your storage media card in the appropriate slot. If you forget to insert your media card, you'll get a "No Card" message.
4. Remove the lens cap.
5. Turn the camera on by either an on-off switch or a sliding lens cover.
6. Turn off the LCD. (See your camera manual for instructions)
7. Make sure your camera is set for automatic mode. Set the image quality to the size image desired-HQ (high quality) or less (to take more pictures on the same card).
8. Bring the camera up to your eye and look through the viewfinder. Positioning the target mark in the center of the viewfinder on your subject will assure that it will be in focus.
9. Push the zoom lever toward W (wide angle) to shoot wide-angle shots or push it toward the T (telephoto) to zoom in.
10. Press the shutter button half way down gently and confirm that the green light next to the viewfinder is illuminated.
11. Press the shutter button all the way down. You'll hear a beep when you take a picture. Wait until the green light stops flashing before taking another one. Remember, digital cameras have a slight delay that traditional cameras don't since it takes a second to save the image to your camera's storage media card.
12. Turn off the camera. Your new photograph should appear on your camera's LCD screen.
TIPS:
1. Use the viewfinder to compose your photograph, not the LCD screen, which will severely drain your battery power. Use your LCD screen only when shooting close-up photographs.
2. Hold your camera steady. Sometimes, the least amount of movement will cause your photo to be slightly blurred. Purchase a very small tripod so that you can provide extra stability for your camera. Also, if there isn't enough light (indoors or outdoors), make sure to use your camera's flash.
3. Experiment with your camera's features and take notes so that you can learn what works for you. Do this before you plan to use it for an important family event or trip.

Dec 15, 2010 | Digital Cameras

1 Answer

When camera is turned on no picture appears in the viewfinder or on the LCD screen, it remains black. The batteries are new. I can access the menu, change settings. Everything works but there is no image...


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, sometimes with lines, especially when taken outdoors (for shutter stuck open). To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help.

Sep 04, 2010 | Canon PowerShot S2 IS Digital Camera

5 Answers

Lens stuck open


i have just had the same problem. mine was stuck open, i gave the lens a slight twist and heard a bit of a crack. i switched it on again, now it is ok.

Apr 09, 2008 | Samsung Digimax S600 Digital Camera

1 Answer

Zoom error


I had sent my camera in for the same issue and they did nothing to help with it. Seems to happen when battery gets low or dies, lack of on-screen battery meter doesn't help. Typically have to manually twist the lens to close it or open it after fresh batteries installed and then seem to fix it.

Apr 08, 2008 | Fuji FinePix E550 Digital Camera

1 Answer

Okay


Your lens is definately broken.

Does the lens stand out in a funny position?

If it does try grabbing hold of it and twisting it slightly while trying to push it back in a correct position.

These camera models do not have lens units available as a service replaceable part and you take it back to the manufacturer they might give you discount on a new model.

Good luck.

Feb 16, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Repair of digital camera


If you see all black in the viewfinder something bad has happened to the lens. It could be stuck, tilted, etc.

It will need to be taken apart and serviced by a trained technician.

Nov 14, 2007 | Nikon Coolpix 5700 Digital Camera

1 Answer

Area captured in photo different from area saw in viewfinder


Make sure you look straight through the viewfinder. Keep in mind that the area visible through the viewfinder is slightly smaller than the area captured in the photo. If you're taking a close-up or macro mode picture, turn the camera dial to the LCD mode so that you can use your LCD screen to preview your picture.

Sep 13, 2005 | Epson PhotoPC 800 Digital Camera

1 Answer

Area captured different from viewfinder area


Make sure you look straight through the viewfinder. Keep in mind that the area visible through the viewfinder is slightly smaller than the area captured in the photo. If you're taking a close-up or macro mode picture, turn the camera dial to the LCD mode so that you can use your LCD screen to preview your picture.

Sep 13, 2005 | Epson PhotoPC 650 Digital Camera

1 Answer

Using the camera screen (LCD) as a viewfinder


To use the LCD as a viewfinder: Turn the Mode dial to any Still mode. Press the OK button to turn on the camera screen. Frame your subject in the LCD. Press the Shutter button to take a picture. NOTE: Using the camera screen as a viewfinder significantly reduces battery power. Use it sparingly.

Aug 29, 2005 | Kodak EasyShare One Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Cameras Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...